The S is Silent
07-19-2006, 08:37 PM
I got my wiring harness put into the charger today. The car now cranks over...but after cranking over for a while, my oil pressure gauge isn't moving at all. Everything is turning over just fine, so it has to be a wiring issue between the gauge and the sender (new pump and pickup).
So I hooked the HEP up and tried to start it...and nothing. It just cranks over. My fuel pressure gauge isn't showing any pressure, and I can't hear the walbro prime when I turn the key to the on possition.
What can I check? Is there any way to check and see if the fuel pump is hooked up without pulling it from the tank? I have right at a quarter tank of gas, so I don't think that is the issue.
So I hooked the HEP up and tried to start it...and nothing. It just cranks over. My fuel pressure gauge isn't showing any pressure, and I can't hear the walbro prime when I turn the key to the on possition.
What can I check? Is there any way to check and see if the fuel pump is hooked up without pulling it from the tank? I have right at a quarter tank of gas, so I don't think that is the issue.