PDA

View Full Version : Rear springs



WOP'R
07-16-2006, 02:20 PM
Hi, I was able to get adjustable eibach coil over springs and koni struts for the front of my daytona and koni shocks for the rear. My question is would it be OK if i kept my stock rear springs for the rear or would they simply be too soft?

If they are too soft what kind of springs would be a good choice for the rear?

thanks all
Rob

Speedeuphoria
07-17-2006, 02:13 AM
what rate did you get for the front??
many people like a little more in the rear

WOP'R
07-17-2006, 02:25 AM
the prev owner told me he "thinks" they are 350 lb/inch springs

Speedeuphoria
07-17-2006, 02:57 AM
thats what I going w/ on a Spirit(well there out of stock, so I may get the 375's) and I have 450 in the rear

WOP'R
07-17-2006, 03:49 AM
what kind of rear springs do you have? (brand)

WOP'R
07-17-2006, 05:44 PM
would anyone know the stock spring rate is for the rear springs on a 87-88 Shelby Z?

Speedeuphoria
07-18-2006, 06:08 PM
I just posted my custom adjustable rear suspension in the fabrication area so look their. I used suspension springs brand(I think thats what their called) just because their blue. As for factory replacements good luck pm because they will be custom if you want a higher rate, or get lucky and get someone who doesn't want their eibachs, if you want some 450lb?in springs you could pm csracer on turbododge.com because I think he might sell his as he is trying something like what I did.
look here for factory rates, they should be 135lbs??
http://www.turbododge.com/forums/showthread.php?t=101427