turbovanmanČ
07-14-2011, 02:11 AM
Ok, after getting mine all modded to fit my van, I tried it on my Spirit R/T, even with the GT35R, it cleared the solid bobble strut and everything else. It needs a few tweaks but would be addressed on the final build, so Shayne and I figure we could offer this if the demand is there. The GT35R easily fits so the HE351 should also clear but we can adjust for that too. I also like the placement of the wastegate unless anyone has other idea's?
This is simply a poll, no commitment etc is needed, price TBD. If built, you will be responsible for coolant and oil lines, intake and exhaust hook up and mods. I am redoing my exhaust but reusing my current air intake setup, it still fits and had to lengthen and shorten my coolant lines and put a 90 deg adapter for the oil line.
Obviously material etc to be determined but it will be similiar to this, I will post up the Spirit pics tomorrow.
http://i12.photobucket.com/albums/a228/turbovanman/TIII%20engine%20build%20and%20van%20pics/Picture038.jpg
http://i12.photobucket.com/albums/a228/turbovanman/TIII%20engine%20build%20and%20van%20pics/Picture044.jpg
http://i12.photobucket.com/albums/a228/turbovanman/TIII%20engine%20build%20and%20van%20pics/Picture046.jpg
http://i12.photobucket.com/albums/a228/turbovanman/TIII%20engine%20build%20and%20van%20pics/Picture041.jpg
http://i12.photobucket.com/albums/a228/turbovanman/TIII%20header%20fab%20install%20pics/workcamera198.jpg
http://i12.photobucket.com/albums/a228/turbovanman/TIII%20header%20fab%20install%20pics/workcamera199.jpg
http://i12.photobucket.com/albums/a228/turbovanman/TIII%20header%20fab%20install%20pics/workcamera200.jpg
http://i12.photobucket.com/albums/a228/turbovanman/TIII%20header%20fab%20install%20pics/workcamera210.jpg
http://i12.photobucket.com/albums/a228/turbovanman/TIII%20header%20fab%20install%20pics/workcamera211.jpg
http://i12.photobucket.com/albums/a228/turbovanman/TIII%20header%20fab%20install%20pics/workcamera212.jpg
http://i12.photobucket.com/albums/a228/turbovanman/TIII%20header%20fab%20install%20pics/workcamera213.jpg
This is simply a poll, no commitment etc is needed, price TBD. If built, you will be responsible for coolant and oil lines, intake and exhaust hook up and mods. I am redoing my exhaust but reusing my current air intake setup, it still fits and had to lengthen and shorten my coolant lines and put a 90 deg adapter for the oil line.
Obviously material etc to be determined but it will be similiar to this, I will post up the Spirit pics tomorrow.
http://i12.photobucket.com/albums/a228/turbovanman/TIII%20engine%20build%20and%20van%20pics/Picture038.jpg
http://i12.photobucket.com/albums/a228/turbovanman/TIII%20engine%20build%20and%20van%20pics/Picture044.jpg
http://i12.photobucket.com/albums/a228/turbovanman/TIII%20engine%20build%20and%20van%20pics/Picture046.jpg
http://i12.photobucket.com/albums/a228/turbovanman/TIII%20engine%20build%20and%20van%20pics/Picture041.jpg
http://i12.photobucket.com/albums/a228/turbovanman/TIII%20header%20fab%20install%20pics/workcamera198.jpg
http://i12.photobucket.com/albums/a228/turbovanman/TIII%20header%20fab%20install%20pics/workcamera199.jpg
http://i12.photobucket.com/albums/a228/turbovanman/TIII%20header%20fab%20install%20pics/workcamera200.jpg
http://i12.photobucket.com/albums/a228/turbovanman/TIII%20header%20fab%20install%20pics/workcamera210.jpg
http://i12.photobucket.com/albums/a228/turbovanman/TIII%20header%20fab%20install%20pics/workcamera211.jpg
http://i12.photobucket.com/albums/a228/turbovanman/TIII%20header%20fab%20install%20pics/workcamera212.jpg
http://i12.photobucket.com/albums/a228/turbovanman/TIII%20header%20fab%20install%20pics/workcamera213.jpg