PDA

View Full Version : Wanted: air box to PM hose T2



Anonymous_User
07-14-2006, 12:04 AM
The T2 airbox/IC hoses I have must have come from an '88 and later T2. The plastic hose that goes from the air box to the PM is too short. It would fit an SMEC but not a PM. Strange, I never noticed the difference until recently.

So, if anyone has this plastic duct that runs from the T2 air box to a PM for an '87 LMK.

Boogieman142
07-14-2006, 06:23 AM
measure how long it is and i'll see if the onesi have are a tad bit longer. They are all in a box.

Anonymous_User
07-14-2006, 07:25 AM
I'll do that. Sometime today hopefully.

Turbodave
07-14-2006, 10:51 AM
While you are measuring it take a good look at the airbox inlet, is it round or oval? 89 airboxes had an oval inlet and used a different hose than the 88's

Greedy
07-14-2006, 06:00 PM
I have this one not sure what year it is from.
round inlet and outlet
$10 shipped

Mike