PDA

View Full Version : Will my stock 2.25" swingvalve accept a 2.5" exhaust upgrade?



85shelbycharger
07-13-2006, 03:52 PM
I'm hoping to get this exhaust installed tonight but want to make sure that the 2.5" exhaust donut and downpipe will bolt up to my stock swingvalve first. Can anyone confirm? Thanks.

Darkapollo
07-13-2006, 04:00 PM
I was wondering the same thing. when i switch from my mitsu to the garret if i need to get the other exhaust.

turbovanmanČ
07-13-2006, 04:42 PM
Yes. :nod:

85shelbycharger
07-13-2006, 04:57 PM
Yes. :nod:

Thanks Simon :thumb:

Mopar_Nutz
07-13-2006, 06:28 PM
If it's an 88, it'll bolt right on. An 87 will require a bit of grinding to the flange in order to bolt up. 87 and earlier cars have a narrower bolt spacing than 88+ cars.

Darkapollo
07-13-2006, 06:41 PM
So the 2.25 exhaust on the T3 will fit on the 2.5'' exhaust on my shadow?

turbovanmanČ
07-13-2006, 09:01 PM
So the 2.25 exhaust on the T3 will fit on the 2.5'' exhaust on my shadow?

:confused:

85_600
07-13-2006, 09:24 PM
Not to hijack but along the same lines here - Will I need a newer donut when I take my stock DP off? I know the car is 21 years old but it only has 46k miles on it.

Thanks!
Paul

Back to the topic:o

85shelbycharger
07-13-2006, 09:33 PM
If it's an 88, it'll bolt right on. An 87 will require a bit of grinding to the flange in order to bolt up. 87 and earlier cars have a narrower bolt spacing than 88+ cars.

Well mine is an '85....so I'll have to grind the new exhaust flange then?

Darkapollo
07-13-2006, 09:40 PM
:confused:

Right now I have the mitsubishi turbo, i am replacing it with an early T3 with the smaller exhaust housing...

butchsuppe
07-13-2006, 11:30 PM
So how did a mishi turbo end up on an 85 car?

Mopar_Nutz
07-14-2006, 02:02 AM
Well mine is an '85....so I'll have to grind the new exhaust flange then?
Yep, you'll have to cut a bit out of the bolt holes to get it to line up with the narrower bolt spacing on the 87 and earlier turbos. Not a big deal at all though. But you might have a bit of an extra struggle with the downpipe bolts.

Mopar_Nutz
07-14-2006, 02:03 AM
So the 2.25 exhaust on the T3 will fit on the 2.5'' exhaust on my shadow?
If the turbo is an 88, it'll bolt right up. If it's 87 or older, you'll have to notch it a bit. Either way it'll fit with little or no modification.

Darkapollo
07-14-2006, 02:16 PM
yeah it is an earlier turbo. Thanks for the help.