vntned
05-24-2011, 09:09 AM
Date: 24th May 2011
Username: vntned
Full Name: Ned P Branson
City, State, Zip: Burlington NC 27215
Contact: nedders426@yahoo.com 336-675-5707
Selling or Wanted Price: $2500 or trade f. Im missing my Omni.
Description:
1988 CSXT #213
It has all the shelby stuff including original title, and owners manual. I have complete documentation of everything ever done to it.
Comes with newer 225/50/15 tires (about 4k miles on them)
The good:
20 over wiseco pistons
Stg 2 ported head (stock valves)
Ported and coated exhaust manifold
TU.com TO4E turbo 40 trim .63 stg1
TU.com Stainless turbo lines
TU.com 3in Swingvalve
TU.com 3in downpipe and cat
Big Garret Wastegate can
3in exhaust to rear axel and then its 2.5in
87 CSX Rad/IC combo (looks new) still has shelby part# sticker on it
FWDPerformance budget FMIC unused(needs to be mounted)
555 Transmission Less than 75k miles
TU.com Stage IV(purple) 6puck clutch 100 miles!
Lots of new sensors
Tbi cam
ADJ FPR
ADJ camgear(not installed currently)
+40 injectors(not installed currently)
all 4 polly bushing motor mounts
3bar map (not installed)
Custom Shelgame cal with 2step limiter, shift light capable, setup for up to 3bar/+40s and up to 29psi of boost (not installed)
TurboSmart MBC
Autometer oil pressure gauge, boost gauge, egt gauge
AEM EUGO wideband O2 just installed
Rockford Fosgate Speakers
new Power steering rack (8k miles)
Walbro 255 fuel pump (around 18k miles)
FWDP Vacuum block
Beefier front calipers
New 911 (fwdp.com) brake pads
new rotors
Stainless steel brake lines
New axles
Recent repaint(cheap but presentable)
New custom Decal kit form PositiveImpressions
NOS headlight buckets
I keep the centercaps in the trunk to keep from losing them but i do have all 4
Loads more but I can't think of them at the moment.
The BAD.
It managed to spin rod bearing #4. The crank will have to be turned OR...
Ive got a complete 2.5 T1 bottom end that was rebuilt to stock(honed, rings, bearings, etc) that will go with it as well as a spare A555 trans.
I need this car gone soon or I might have to part it out(dont start calling dibs on parts just yet). I really dont wanna part it, but if I do it only be engine trans getting parted. This car is 100% rust free with a excellent suspension brakes and interior. If you want the car with out the engine/trans/turbo etc. I'll sell the complete rolling car for $1500. Either way this is one hell of a steal. The wife is pushing me to get rid of it and I dont have a place to rebuild it and let it sit.
http://i105.photobucket.com/albums/m203/_martabo/springsdac11-13.jpg
http://i105.photobucket.com/albums/m203/_martabo/31811-7.jpg
http://i225.photobucket.com/albums/dd91/vntned/DSCN2141.jpg
http://i225.photobucket.com/albums/dd91/vntned/DSCN2139.jpg
http://i225.photobucket.com/albums/dd91/vntned/DSCN2143.jpg
http://i225.photobucket.com/albums/dd91/vntned/DSCN2146.jpg
http://i225.photobucket.com/albums/dd91/vntned/DSCN2148.jpg
http://i225.photobucket.com/albums/dd91/vntned/DSCN2156.jpg
http://i225.photobucket.com/albums/dd91/vntned/DSCN2158.jpg
http://i225.photobucket.com/albums/dd91/vntned/DSCN2154.jpg
http://i225.photobucket.com/albums/dd91/vntned/DSCN2160.jpg
Username: vntned
Full Name: Ned P Branson
City, State, Zip: Burlington NC 27215
Contact: nedders426@yahoo.com 336-675-5707
Selling or Wanted Price: $2500 or trade f. Im missing my Omni.
Description:
1988 CSXT #213
It has all the shelby stuff including original title, and owners manual. I have complete documentation of everything ever done to it.
Comes with newer 225/50/15 tires (about 4k miles on them)
The good:
20 over wiseco pistons
Stg 2 ported head (stock valves)
Ported and coated exhaust manifold
TU.com TO4E turbo 40 trim .63 stg1
TU.com Stainless turbo lines
TU.com 3in Swingvalve
TU.com 3in downpipe and cat
Big Garret Wastegate can
3in exhaust to rear axel and then its 2.5in
87 CSX Rad/IC combo (looks new) still has shelby part# sticker on it
FWDPerformance budget FMIC unused(needs to be mounted)
555 Transmission Less than 75k miles
TU.com Stage IV(purple) 6puck clutch 100 miles!
Lots of new sensors
Tbi cam
ADJ FPR
ADJ camgear(not installed currently)
+40 injectors(not installed currently)
all 4 polly bushing motor mounts
3bar map (not installed)
Custom Shelgame cal with 2step limiter, shift light capable, setup for up to 3bar/+40s and up to 29psi of boost (not installed)
TurboSmart MBC
Autometer oil pressure gauge, boost gauge, egt gauge
AEM EUGO wideband O2 just installed
Rockford Fosgate Speakers
new Power steering rack (8k miles)
Walbro 255 fuel pump (around 18k miles)
FWDP Vacuum block
Beefier front calipers
New 911 (fwdp.com) brake pads
new rotors
Stainless steel brake lines
New axles
Recent repaint(cheap but presentable)
New custom Decal kit form PositiveImpressions
NOS headlight buckets
I keep the centercaps in the trunk to keep from losing them but i do have all 4
Loads more but I can't think of them at the moment.
The BAD.
It managed to spin rod bearing #4. The crank will have to be turned OR...
Ive got a complete 2.5 T1 bottom end that was rebuilt to stock(honed, rings, bearings, etc) that will go with it as well as a spare A555 trans.
I need this car gone soon or I might have to part it out(dont start calling dibs on parts just yet). I really dont wanna part it, but if I do it only be engine trans getting parted. This car is 100% rust free with a excellent suspension brakes and interior. If you want the car with out the engine/trans/turbo etc. I'll sell the complete rolling car for $1500. Either way this is one hell of a steal. The wife is pushing me to get rid of it and I dont have a place to rebuild it and let it sit.
http://i105.photobucket.com/albums/m203/_martabo/springsdac11-13.jpg
http://i105.photobucket.com/albums/m203/_martabo/31811-7.jpg
http://i225.photobucket.com/albums/dd91/vntned/DSCN2141.jpg
http://i225.photobucket.com/albums/dd91/vntned/DSCN2139.jpg
http://i225.photobucket.com/albums/dd91/vntned/DSCN2143.jpg
http://i225.photobucket.com/albums/dd91/vntned/DSCN2146.jpg
http://i225.photobucket.com/albums/dd91/vntned/DSCN2148.jpg
http://i225.photobucket.com/albums/dd91/vntned/DSCN2156.jpg
http://i225.photobucket.com/albums/dd91/vntned/DSCN2158.jpg
http://i225.photobucket.com/albums/dd91/vntned/DSCN2154.jpg
http://i225.photobucket.com/albums/dd91/vntned/DSCN2160.jpg