View Full Version : size of t1 downpipe??
Purpleskunk
01-01-2006, 02:27 PM
Just a basic question, but I am putting together my own exhaust and need to know what size is the downpipe on an '87 Stock t1 S/C
bill2
01-01-2006, 02:51 PM
That should be 2 1/4.
cordes
01-01-2006, 04:15 PM
That should be 2 1/4.
+1
Also, a pretty cheap upgrade would be a 2.5in pipe out of a blow through TI car.
OneFastBaron
01-01-2006, 04:40 PM
+1
Also, a pretty cheap upgrade would be a 2.5in pipe out of a blow through TI car.
not 88 2.2TI blow throughs though, they still have the 2.25" downpipes.
turbovanmanČ
01-01-2006, 05:23 PM
Any mitsu car/van, R/T will have the 2.5 inch DP.
Purpleskunk
01-01-2006, 05:56 PM
awesome thanks guys for the quick response
OneFastBaron
01-01-2006, 07:15 PM
Any mitsu car/van, R/T will have the 2.5 inch DP.
BUT the 88 2.2 TI ;)
turbovanmanČ
01-01-2006, 07:26 PM
BUT the 88 2.2 TI ;)
Hahahahhaa, ok, any 89 and up ;)
OneFastBaron
01-01-2006, 07:28 PM
Hahahahhaa, ok, any 89 and up ;)
you got it man :thumb:
KJ
88 Turbo Lebaron
www.cardomain.com/id/onefastbaron88
MiniMopar
01-04-2006, 01:50 AM
You'll have to do a bit of grinding on the flange plate to elongate the bolt holes. The old T1 Garrett had a narrower bolt pattern. The '88 T1 downpipe has the wider pattern, even though it is 2-1/4". Also, the pipe is a tad bigger than 2-1/4", especially by the cat....
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.