PDA

View Full Version : Turbos/Intercoolers: 2.5" swingvalve & 60 trim T3 compressor housing


audiomaninc
04-09-2011, 10:56 AM
2.5" swingvalve run about 500 miles, very good condition, also T3 compressor housing machined for 60 trim T3 wheel.

2.5" swingvalve: $100.00
60 trim compressor housing: $50.00
prices don't include shipping. Thanks! Also up for offers, or trades, or whatever.

http://img813.imageshack.us/img813/4140/svalve3.jpg (http://img813.imageshack.us/i/svalve3.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)

http://img851.imageshack.us/img851/4994/housing.jpg (http://img851.imageshack.us/i/housing.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)

http://img810.imageshack.us/img810/9407/housing2.jpg (http://img810.imageshack.us/i/housing2.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)

http://img202.imageshack.us/img202/4053/svalve.jpg (http://img202.imageshack.us/i/svalve.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)

http://img715.imageshack.us/img715/8232/svalve2.jpg (http://img715.imageshack.us/i/svalve2.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
GLHNSLHT2
04-09-2011, 12:09 PM
that SV is off an 89 car? Hard to tell with the angle of the pics if it's a true 89 2.5" SV or if it could possibly be an 88 wide flange 2.25" SV.
audiomaninc
04-09-2011, 02:21 PM
it's a 2.5". Not off an 1989 car per se. It was bought on this forum from somebody who purchased it from FWD and never installed it; thus the low mileage. The TU 3" swingvalve bolts up to it. I'll take measurements if you'd like.
V8GremlinX
04-09-2011, 02:41 PM
If its a 2.5 I will take sv. Pm sent
GLHNSLHT2
04-09-2011, 03:59 PM
hehe looks gone already, I was just wanting to clarify because I pointed a friend to this thread since he'll also be looking for one.
SwinGenX
04-09-2011, 04:06 PM
I am interested in the compressor housing. Please send me PM with price shipped to 50322 and preferred method of payment.

Thanks!
audiomaninc
04-09-2011, 04:19 PM
hehe looks gone already, I was just wanting to clarify because I pointed a friend to this thread since he'll also be looking for one.


http://img593.imageshack.us/img593/3179/svalve5.jpg (http://img593.imageshack.us/i/svalve5.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)

http://img6.imageshack.us/img6/8798/svalve4.jpg (http://img6.imageshack.us/i/svalve4.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)

first pic with a section of 3" pipe inside it, 2nd pic with my credit card and a ruler...all better? :thumb:

---------- Post added at 04:19 PM ---------- Previous post was at 04:18 PM ----------

Swingvalve sold to V8GremlinX pending payment!
Orangetona
04-09-2011, 04:20 PM
LOL @ credit card :)
audiomaninc
04-09-2011, 11:57 PM
Swingvalve SOLD!
Compressor housing still available!
Vigo
04-10-2011, 12:56 AM
Is the housing machined for a regular 60 trim or a super 60 trim t3 wheel? There is a difference.

If you don't know which, you could measure the inducer diameter where the wheel inlet fits into the housing. The regular 60 trim wheel will be close to 46.5mm, the super60 will be close to 48.3mm.

Let me know, if its a super60 im interested! Thanks!
audiomaninc
04-10-2011, 09:31 AM
Sorry Vigo, it's a regular 60 trim.
SwinGenX
04-10-2011, 03:45 PM
I am interested in the compressor housing. Please send me PM with price shipped to 50322 and preferred method of payment.

Thanks!

Payment sent
audiomaninc
04-10-2011, 05:41 PM
Both items SOLD!! Thanks everybody!
Vigo
04-10-2011, 10:53 PM
Thanks for getting back to me! :)