View Full Version : Need options for a 3 bar map sensor
tehdrizzle
04-07-2011, 03:40 PM
I was looking at Rock Auto and Delphi part number #: PS1008111B1 but I can't find anywhere online that states if it's 2 bar or not. I also called Napa and they said that they don't carry any 3 bar map sensors but can order them for around $108. Any ideas on where to get a 3 bar map for a fair price? I want to install my FWDPerformance stage 5 cal and see what the car really has :eyebrows:.
clarkwhoracing
04-07-2011, 03:48 PM
Boost Button . com
http://www.boostbutton.com/boostbutton/catalog/index.php?cPath=30&osCsid=b9276e58bfbc7e2200b2f4c15bfcf9ec
Great price - I am gonna pick one up.
Not sure with his if a different plug is needed - thought I saw that somewhere.
tehdrizzle
04-07-2011, 03:54 PM
I just picked up a set of Autolite AR51's to go to a cooler plug.
Juggy
04-07-2011, 04:01 PM
if u look around online you can find them for 40-50 bucks new...
but anyway. if we got the map sensor plug, couldnt we get away using these?
http://www.modernperformance.com/mopar-sensor-0305-neon-srt4-p-2151.html
hard to beat that price...
ShelGame
04-08-2011, 08:29 AM
Boost Button . com
http://www.boostbutton.com/boostbutton/catalog/index.php?cPath=30&osCsid=b9276e58bfbc7e2200b2f4c15bfcf9ec
Great price - I am gonna pick one up.
Not sure with his if a different plug is needed - thought I saw that somewhere.
It needs a different plug for the '91+ cars. The '90 and earlier are fine, though IIRC, you will need to cut a notch on the harness connector.
Force Fed Mopar
04-08-2011, 08:42 AM
if u look around online you can find them for 40-50 bucks new...
but anyway. if we got the map sensor plug, couldnt we get away using these?
http://www.modernperformance.com/mopar-sensor-0305-neon-srt4-p-2151.html
hard to beat that price...
That's probably the Caliber SRT sensor (it is supposed to be 3-bar), and probably it can be used if you had the pigtail to cut and splice into your original harness. You'll have to figure out a way to mount it though too.
---------- Post added at 08:42 AM ---------- Previous post was at 08:40 AM ----------
It needs a different plug for the '91+ cars. The '90 and earlier are fine, though IIRC, you will need to cut a notch on the harness connector.
Yeah you do.
Just as a tease, I have a Caliber 3 bar MAP sensor hooked up in my van. I was having trouble scaling a cal for it. Last month was really slow so I had a lot of time to play with it. Harry (Tryingbe) came by to help me. Then I was having trouble getting my computer to work with my Ostrich and burner. I'm running Windows XP on a MacBook Pro and it turned out to be operator error. When I finally got everything working I got busy again and haven't had time to play with it. Once I get it tuned and running properly I'm going to do a write-up on the install. I got the sensor from the dealer for $25. The plug is available also for $16 but I think I know the earlier years and models they're available on so you can grab them from the junkyards.
http://i42.photobucket.com/albums/e301/thebest4/DSCF0244.jpg
A.J.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.