6 bolt turbo flywheel

[strang3majik]

I'm looking for a 6 bolt turbo flywheel, and maybe even a turbo clutch kit if you have a nice one for a fair price.

PM me if you have either with a price + shipping to 33981.

Thanks in advance!

[BadAssPerformance]

Do the 6-bolt flywheels take a smaller pressure plate bolt pattern? I seem to remember something not lining up like that...

[inplansight]

I might have one hanging around , I will have to check the shop.

[4 l-bodies]

IIRC, on the 84-85 (six bolt flywheels), turbo cars had a different PP bolt pattern than the N/A cars to match the disk size.
Todd

[strang3majik]

my question is...is the n/a GLH the same deal, or would it have the turbo clutch/flywheel in it just because it was the Hi Po model?

As I've said before, mine came factory with an electric in tank pump and a plug where the turbo oil line would go, all on a carb motor. So, they must have figured it was going to be built up, so, maybe they put the turbo clutch/flywheel in it as well?

And, I read that too about the bolt pattern being a larger radius to allow for the larger clutch.

[86seeS]

I got a 6 bolt fly wheel out of an 85 shelby already resurfaced and ready to go 50.00 & shipping

[4 l-bodies]

my question is...is the n/a GLH the same deal, or would it have the turbo clutch/flywheel in it just because it was the Hi Po model?

As I've said before, mine came factory with an electric in tank pump and a plug where the turbo oil line would go, all on a carb motor. So, they must have figured it was going to be built up, so, maybe they put the turbo clutch/flywheel in it as well?

And, I read that too about the bolt pattern being a larger radius to allow for the larger clutch.
Easy way to check is the std. N/A cars used a 215mm disk and the turbos (HP) used a 228-232mm disk. 84-85 6 bolt turbo flywheel is #4348314 N/A is 4348312.
Todd