hutwe
02-10-2011, 09:51 AM
Hi,
I've been waffling over selling this car for some time now, and the truth of the matter is I don't have time for it anymore. I live in Quincy, the car is currently at my dad's shop on Cape Cod.
The Good: The car runs great, pulls like a beast. It's been meticulously cared for, comes with complete documentation. Original window sticker, and all maintenance related receipts from date of purchase until now. Dynoed at 230 WHP by previous owner. Mechanically, the car is in fantastic shape inside and out, it's not ever been raced to my knowledge, always very well taken care of. Always been run on synthetic oil, and does not burn any oil either! Non-Smoker owned always (cigarette lighter is still virgin). Car is located in Massachusetts. Any and all mods were done in the interest of replacing with the best available part, bc that's how I roll:)
The bad:
There's a hole in the bottom of the rocker on the passenger side. I cleaned it out, and it's not structural, so it can be fixed; again no time. The rear driver's side door has rust on the bottom seam. I have a rust free replacement door for this, just needs to be installed. Also needs a new grill, I do not have pics of this yet.
Lastly, the headliner has sagged:(
New/Upgrades:
TU 3 core aluminum radiator.
2 1/2 inch 304 Stainless Mandrel exhaust pipes
dynomax muffler
4 Michelin Pilot Exalto tires (<25000 miles)
Match ported head
T/U 4 puck ceramic clutch w/ pressure plate
Intake and exhaust manifold gaskets
FWD Performance custom 5-layer headgasket (reusable)
ARP Head studs
Exhaust stud set
FWDP Stainless turbo coolant lines
Aluminum Core Plugs (not installed)
Magnecore 8.5mm
Idler Pulley
Intermediate shaft w/ bushings
Timing belt
Serp belt
Ball Joints
Tie rod bushings
Sway bar bushings
Solid Poly motor mounts all around.
Jackson Timing belt mod
Valve cover gaskets
Original Rebuilt starter (local rebuilder, not autozone reman)
Asking 2200/bo.
Feel free to ask me any questions. I won't be able to get more pics up until I get down there again, which won't be for another 2 weeks.
http://i796.photobucket.com/albums/yy242/hutwe/front.jpg
http://i796.photobucket.com/albums/yy242/hutwe/far.jpg
http://i796.photobucket.com/albums/yy242/hutwe/corner.jpg
http://i796.photobucket.com/albums/yy242/hutwe/reardeck.jpg
I've been waffling over selling this car for some time now, and the truth of the matter is I don't have time for it anymore. I live in Quincy, the car is currently at my dad's shop on Cape Cod.
The Good: The car runs great, pulls like a beast. It's been meticulously cared for, comes with complete documentation. Original window sticker, and all maintenance related receipts from date of purchase until now. Dynoed at 230 WHP by previous owner. Mechanically, the car is in fantastic shape inside and out, it's not ever been raced to my knowledge, always very well taken care of. Always been run on synthetic oil, and does not burn any oil either! Non-Smoker owned always (cigarette lighter is still virgin). Car is located in Massachusetts. Any and all mods were done in the interest of replacing with the best available part, bc that's how I roll:)
The bad:
There's a hole in the bottom of the rocker on the passenger side. I cleaned it out, and it's not structural, so it can be fixed; again no time. The rear driver's side door has rust on the bottom seam. I have a rust free replacement door for this, just needs to be installed. Also needs a new grill, I do not have pics of this yet.
Lastly, the headliner has sagged:(
New/Upgrades:
TU 3 core aluminum radiator.
2 1/2 inch 304 Stainless Mandrel exhaust pipes
dynomax muffler
4 Michelin Pilot Exalto tires (<25000 miles)
Match ported head
T/U 4 puck ceramic clutch w/ pressure plate
Intake and exhaust manifold gaskets
FWD Performance custom 5-layer headgasket (reusable)
ARP Head studs
Exhaust stud set
FWDP Stainless turbo coolant lines
Aluminum Core Plugs (not installed)
Magnecore 8.5mm
Idler Pulley
Intermediate shaft w/ bushings
Timing belt
Serp belt
Ball Joints
Tie rod bushings
Sway bar bushings
Solid Poly motor mounts all around.
Jackson Timing belt mod
Valve cover gaskets
Original Rebuilt starter (local rebuilder, not autozone reman)
Asking 2200/bo.
Feel free to ask me any questions. I won't be able to get more pics up until I get down there again, which won't be for another 2 weeks.
http://i796.photobucket.com/albums/yy242/hutwe/front.jpg
http://i796.photobucket.com/albums/yy242/hutwe/far.jpg
http://i796.photobucket.com/albums/yy242/hutwe/corner.jpg
http://i796.photobucket.com/albums/yy242/hutwe/reardeck.jpg