2 Piece intake plenum flanges

[lengel]

Got my first one done tonight. It would be great for you guys building custom upper plenums. All the hard work is done with these flanges, all you need is a 14" long piece of 5" od 4.5 id tube, and two end cap, and you will have your self a custom upper big plenum. Price is $100+shipping LMK what you guys think.
Thanks Adam

http://i379.photobucket.com/albums/oo237/bethany017/Picture1720.jpg

http://i379.photobucket.com/albums/oo237/bethany017/Picture1721.jpg

http://i379.photobucket.com/albums/oo237/bethany017/Picture1719.jpg

[rx2mazda]

WTF else are you working on?????!! You got skillz BTW, I vote for more TIII goodies!:nod:

[135sohc]

how about some transmission parts ?

[GLHNSLHT2]

nice work :)

[DOHCRT]

I just want one to sit on the coffee table. Very nice work!!

[22shelby]

LOVE IT!!! i will be purchasing one of these from you.... thank you!!

[turbovanman²]

I just want one to sit on the coffee table. Very nice work!!

No doubt, that piece is like sex, :hail:

[BIG PSI]

I will take one LENGEL.
I am going our of town on business and leaving this morning.
Can you save one for me ?

Chuck

[karlak]

looks good

[lengel]

Thanks for the compliments guys. The first one that I had done sold today, but I have stock at work to do 8 more. So if you want one PM me and I can make you one.


WTF else are you working on?????!!
I have a few other ideas!;)


how about some transmission parts ?

What kind of trans parts were you thinking of?

[turbovanman²]

What kind of trans parts were you thinking of?

I'd like an A413 LU input shaft.

[Pat]

Nice Adam, very nice. What is the width?

[OnLooker]

What if you left the bottom flat and machine the runners so they were more like velocity stacks so the opening is off the floor?

[bakes]

That nice piece so when you going to make the lower to match

---------- Post added at 07:00 PM ---------- Previous post was at 06:56 PM ----------

so when are you going to make the matching lower piece:eyebrows::love:

[lengel]

Nice Adam, very nice. What is the width?

Thanks! its 3.25" wide 14" long


What if you left the bottom flat and machine the runners so they were more like velocity stacks so the opening is off the floor?

Yeah I could do that, but I think I going to keep it how it is. I did it this why to keep it simple but effective, and to keep the price where I would sell them. if you are still interested let me know. thanks for your input.


That nice piece so when you going to make the lower to match

---------- Post added at 07:00 PM ---------- Previous post was at 06:56 PM ----------

so when are you going to make the matching lower piece:eyebrows::love:

Thanks! dont think Ill be making them anytime soon as im a TIII guy. Just wanted to make a few of these to help some of guys wanting to make custom big plenum uppers. I think lonewolf makes full 8V intake.

[zin]

I gotta get another job or something! Very nice work, I hope I can score one sometime...

Mike

[turbovanman²]

If I had a high HP 8 valve in the works, I'd be all over this.

[rx2mazda]

as im a TIII guy.....

Well get back to your roots! I vote for a machined water box off the head with fill-cap incorporated in. :D

[BLUEBALL]

Geez,Im on the fence of fixing the 8 valve motor again or goin 16v. And this is somethin needed for way too long. When will the others be up for sale? Maybe get one in case. :eyebrows:

[lengel]

Geez,Im on the fence of fixing the 8 valve motor again or goin 16v. And this is somethin needed for way too long. When will the others be up for sale? Maybe get one in case. :eyebrows:

They are up for sale right now. I am going to make them as I get buyers for them. I have 3 im making this week you can be number 4 if you want. If you want one PM me


Well get back to your roots! I vote for a machined water box off the head with fill-cap incorporated in. :D

Thats a good idea Carroll, but thats at the bottom of the list. I have better TIII goodies im working on!:eyebrows:

[rx2mazda]

Thats a good idea Carroll, but thats at the bottom of the list. I have better TIII goodies im working on!:eyebrows:

What? :D

[iTurbo]

I like the thermostat housing idea! Maybe not for a TIII though:evil:

Seriously though I think I might have to pick one of these up just in case I run back to the old 8v country.

[lengel]

All the flanges have been sold. If we get a few people together that want one Ill do another batch.

[turbovanman²]

Well get back to your roots! I vote for a machined water box off the head with fill-cap incorporated in. :D

Oh yeah baby.


They are up for sale right now. I am going to make them as I get buyers for them. I have 3 im making this week you can be number 4 if you want. If you want one PM me



Thats a good idea Carroll, but thats at the bottom of the list. I have better TIII goodies im working on!:eyebrows:

Can't wait.

[coronet2fast]

let me know if you do another batch. interested in trying some idea I have for an upper and this would make it that much easier.

[zin]

I'm interested as well, hopefully by then I'll have some $$ to invest!

Mike

[contraption22]

Received mine on Saturday. Wow... really nice piece! Thanks man!

[marbuch]

Let me know what the hell does BTW stand for i am from the bush

[contraption22]

Let me know what the hell does BTW stand for i am from the bush

"By The Way"

[Juggy]

I like the thermostat housing idea!

ditto!! or else i will be forced to run some sort of GM style overflow pressure tank!!!!!

[Dave]

Lengle, just got mine today, thanks to my dad for the early birthday present. It's an absolute work of art! Thanks again. My friends are drooling all over it! :thumb:

[lengel]

Glad you guys are happy with the flange. If we can get (4) people to give a 50% deposit I can get started on another batch of these. LMK
Adam

[zin]

Glad you guys are happy with the flange. If we can get (4) people to give a 50% deposit I can get started on another batch of these. LMK
Adam

DAMN IT! You're going to make me put something on a credit card aren't you?:nod:

If it comes down to needing one more to do the deal... I'll go cash in my change jar...:rolleyes: After all, it would be for a worthy part!:hail:

Mike

[rx2mazda]

ditto!! or else i will be forced to run some sort of GM style overflow pressure tank!!!!!

That's 3! Ok, I'm starting a thread! Ha

[Dave]

Really beautiful quality. :thumb: What material aluminum are these again?

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs051.snc6/168142_10150092649548847_501663846_6159597_8065342 _n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs273.snc6/180144_10150092649758847_501663846_6159599_6767405 _n.jpg

[GLHNSLHT2]

What material aluminum are these again?

What's it matter? But I'd say that it's most likely 6061.

[Dave]

Because I'd like to match it with the material I'm going buy. Mind your business. ;)

[Reaper1]

I think it looks like crap! I 3 year old with play-doh could do better! LOL ;) JK!

I REALLY wish my 2-peice hadn't got stolen. I'd be all over this...like NOW!!

[lengel]

It is 6061. This is where I got my tube from. If you call them they will cut any length you want.

http://www.industrialmetalsales.com/1793.html

---------- Post added at 05:27 PM ---------- Previous post was at 05:20 PM ----------


I think it looks like crap! I 3 year old with play-doh could do better! LOL ;) JK!

I REALLY wish my 2-peice hadn't got stolen. I'd be all over this...like NOW!!

I now have a 2 piece intake I dont need. You could buy it then you would have a reason to buy a flange! LOL

[Reaper1]

I now have a 2 piece intake I dont need. You could buy it then you would have a reason to buy a flange! LOL

Well...I'm keeping my options open. I just got quoted a price for a completely done, bolt on custom manifold by another member that is the A1 shiznit, but I don't have the $$$ flow for it.

What are you talking for the 2-peice? How complete is it?

[lengel]

I am making another batch of these, and they will be ready to ship this coming week. So let me know if you want one.

[puppet]

Adam ... noticed your tubing link lacked ends. Hope you don't mind this additional link for those.

http://sharpeproducts.thomasnet.com/viewitems/hemispheres-balls/hemispheres?

[lengel]

I have (6) of these left. They are done and ready to ship!

Thanks Adam

[Dave]

Adam ... noticed your tubing link lacked ends. Hope you don't mind this additional link for those.

http://sharpeproducts.thomasnet.com/viewitems/hemispheres-balls/hemispheres?

That may change my setup now, I couldnt remember where I found those. Thanks for the link!

[lengel]

I still have 5 of these left.

[depenbrok]

Wow! Nice work!:hail:

[lengel]

If anyone would like one of these let me know. I would need two people to commit to buying them for me to order the stock.

Adam

[Shadowjake]

Still cost a benjamin? I don't have a 2 peice yet but would get one of these flanges just to have what I need down the road. If someone else commits, I'm in.

[lengel]

Still cost a benjamin? I don't have a 2 peice yet but would get one of these flanges just to have what I need down the road. If someone else commits, I'm in.

Yup, still $100+ shipping. I got deposites for 3 flanges, so I will be doing these. If you want to be # 4 Let me know.

Adam

[zin]

Soo tempting, but that money's already spent...:( Maybe next time/latter...

Mike

[Shadowjake]

I'll take one. Pm me the paypal info and how much you want for deposit. Thanks!

[lengel]

I just finished up another 10 of these only got 2 left. pm me if you if you want one.

[Shadowjake]

Got mine in the mail yesterday. Beautiful piece. Thanks again!

[lengel]

Only got one of these left!


Got mine in the mail yesterday. Beautiful piece. Thanks again!

Glad you like it!

[Khajjathefang]

Still got it? Pm

[88C/S]

Got mine last week, Thing of Beauty! Should put it on display until I'm ready to have a plenum built. Thanks!

[Khajjathefang]

Last ones mine suckers :P

[lengel]

All of them have been sold! We can do another batch if there is interest.

Adam

[MILKCARTON]

Can you run another batch of these, I need one!

[lengel]

I would need two people to pay in full to get the ball rolling on these.

[glhs727]

well I have some extras in stock from the last run Adam did that I'd be willing to sell

[lengel]

Im going to be making another batch of these this month.

[MILKCARTON]

I want two

[lengel]

I have some more of these done and ready ship! PM me if you want some.

Adam

[MILKCARTON]

I got mine today, wow!

[lengel]

If any one is interested, I only have one left.