2.2 valve spring compressor

[csomni]

looking for this bad boy ( k-d 3087) paypal ready

[boost geek]

http://www.woodys-auto-supply.com/mobile/mobile-tool-details.asp?prod=KDT-3087

http://www.sjdiscounttools.com/kdt3087.html

[Juggy]

if its just for 8 valve heads, you can get away using those really cheap 15-20 dollar ones

[Blue Iroc R/T]

Here is a KD 2400. It is VERY Similar and it WILL work on both the 8v & 16v heads. I have one of each.
http://cgi.ebay.com/ebaymotors/K-D-Tool-Mfg-Adj-Valve-Spring-Compressing-No-2400-KD-_W0QQcmdZViewItemQQhashZitem27b7925494QQitemZ17058 3544980QQptZMotorsQ5fAutomotiveQ5fTools

The 3087 is a little nicer to use when the head is still on the car, especially on the 16v head. Because the handle on the 3087 can be changed to 90 deg. so the handle isn't hitting the fire wall.

Here are pictures showing both the KD-2400 and the KD-3087:
http://www.pbase.com/rmscott/valve_spring_compressor

[22shelby]

this is true to a certain extent if you are running a Double valve spring like the MPs then no you cat use the cheapie screw type... i was stumped for bout 20 minutes from this one...

ok carry on

[csomni]

i was thinking about making one but if a can pick one up for about 35.00 shipped (kd 3087) ill just buy one