Partial 3" Downpipe

[1BADVAN]

I am looking for a 3" downpipe that has been cut or something ( i dont want to pay for a full one) Looking at redoing my downpipe and i would like the donut to about 2" past the first 45 degree turn if that makes sense? I am installing an electric cutout and want to weld it to the end of this

[Turbo224]

Have you tried looking at the piping ATP offers? I used their stuff to build my downpipe and it worked great.

http://www.turbododge.com/dodge_pictures/files/9/3/3/3/downpipe_5.jpg


All I used were these two pipes.

http://www.atpturbo.com/mm5/graphics/00000001/Catalog%20Images/pipe/mdp002-01.jpg

http://www.atpturbo.com/mm5/graphics/00000001/Catalog%20Images/pipe/ATP-ALM-002_450.jpg

[1BADVAN]

thanks that looks good but i really need the donut part to fit in my 3" swingvalve, i built one similar to yours when i had the TBI header on it

[Turbo224]

Could you just bolt something like this to the swingvalve and weld your pipe directly to it?

http://i.ebayimg.com/22/!CBHmbMw!Wk~$(KGrHqR,!hwE0EiJPle1BNGVho!Gs!~~0_12. JPG

http://cgi.ebay.com/ebaymotors/2-BOLT-3-INLET-EXHAUST-DOWNPIPE-TESTPIPE-DONUT-FLANGE-_W0QQcmdZViewItemQQhashZitem230ce361ffQQitemZ15054 0083711QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries

[1BADVAN]

that seems like a good idea! Thanks i will have to look into that!

[Turbo224]

Yeah, if you or someone you know can weld, it should be a piece of cake. Just find a pipe that has the right bend and you should be able to fit it in there pretty easily.

[Juggy]

make sure you get a flex pipe in there