Parting out: '79 Turismo TC3

[Force Fed Mopar]

1.7 VW engine, 4-spd manual, aluminum 13" 5-spoke wheels :eyebrows: , Black interior. Body is straight, paint is pretty gone and the hood, roof, fender tops are surface rusty, but not rusted out. I don't have a working camera at the moment, I will try to get one asap. The dash is in very good shape, front seats need recovering, back seat looks nearly new, they are vinyl. Hatch has rear defrost and the early style spoiler. Front bumper cover is in very good condition, except paint is mostly gone. Haven't run the engine but it is very clean and has a new carb on it. This was a 2-owner vehicle, and was daily driven until it was parked about 8-10 years ago. Car sat in an open concrete driveway, not under trees. However, the floorboards are rusted through in the footwells unfortunately (since I know that's the first thing everyone is gonna want lol). Carpet is good, windows are all good, doors are good, door handles work. Door panels are missing.

Car is located in Spartanburg SC. LMK what you need and I'll give you a price. My PayPal addy is forcefedmopar4me@aol.com for those that wish to use it, if you prefer money order lmk and I'll PM you my name and address.

[1984rampage]

How much for the fiberglass "header panel". Its the thing thats behind the front bumper that houses the headlights. I believe its the same for shelby chargers which is what I need it for lol

[moparman76_69]

:needpics1:


Seriously....

[Force Fed Mopar]

How much for the fiberglass "header panel". Its the thing thats behind the front bumper that houses the headlights. I believe its the same for shelby chargers which is what I need it for lol

$50 + shipping. Need your zip for shipping quote.


:needpics1:


Seriously....

I'll get/borrow a camera asap.

Also, PM's have been responded to, back bumper support and manual brake parts are pending sale.

[supercharged024]

Does it have the cargo cover for the back? I'm looking for one in black.

[Force Fed Mopar]

No cargo cover, sorry.

[1984rampage]

$50 + shipping. Need your zip for shipping quote.

34233. Let me know! :D

[Force Fed Mopar]

34233. Let me know! :D

$75 shipped.

[DodgeZ]

bump for pimp seller

[Turbo Uno]

How much for the tail light harness's (should be 2 individual, one for each tail light). I already have '79 tail lights but need the harness to fill in all the proper bulb slots. I'm still using the '85 harness and it has fewer bulbs. Thanks.

Shipping to 91411

[Force Fed Mopar]

How much for the tail light harness's (should be 2 individual, one for each tail light). I already have '79 tail lights but need the harness to fill in all the proper bulb slots. I'm still using the '85 harness and it has fewer bulbs. Thanks.

Shipping to 91411

$55 shipped, and I will check them and make sure none of the sockets are melted.

[j4278h]

rear spoiler to 49079

[2.216VTurbo]

No one for the Aluminum rear bumper? 21lbs lighter than your steel Charger bumper...

[1984rampage]

$75 shipped.

Get me a picture of it and I think we have a deal

[csomni]

any pics of the wheels.

[Force Fed Mopar]

rear spoiler to 49079

$75 shipped


No one for the Aluminum rear bumper? 21lbs lighter than your steel Charger bumper...

It is pending right now.


Get me a picture of it and I think we have a deal

I'll have to get it off first.


any pics of the wheels.

I have pics of the whole car, I will have them up later today (off to work right now).

[Force Fed Mopar]

pics :nod:

[1984rampage]

bump! Have a chance to get anything pulled yet?

[Force Fed Mopar]

Not yet, still sick. I have a bad chest cough that I'm trying to kick. As soon as I feel well enough to get out for a while (besides work) I'll start getting stuff off. Was hoping for today but doesn't look like it'll happen.

[moparman76_69]

I'd love to have that car.

[Force Fed Mopar]

All, I am going to try to get down to the yard tomorrow and pull the parts.

Turbo Uno, j4278h, need to know for sure if you want those parts before I pull them.

Moparman, I'll sell you the rest of the car if you want it once I get the parts already spoken for pulled, but I do not have a title and as mentioned it does need floorpans. I'm sure I can get a title (original was just lost, no liens or anything) for a fee.

[1984rampage]

Looking forward to it! Be careful when pulling the header panel. It likes to crack very easily lol

[1984rampage]

bumpp

[Force Fed Mopar]

I got your piece out, just haven't taken a pic yet. I'm still a bit sick so I've been lazy today :p

The other parts I have to pull I have to go back and finish getting on Tues (my next day off), I didn't have all the tools I needed yesterday.

[Turbo Uno]

Turbo Uno, need to know for sure if you want those parts before I pull them
$55 shipped is too steep for me. I'll just have to wait out for my local yard to bring one in.

[1984rampage]

Hey man, let me know when you get pics of the header panel and how you want me to pay for it!

Thanks,
James

[Mikeywk]

How much for the steering wheel with the horn pad and related hardware to 44121. Thanks!!

[54inches]

Shifter boot on the seat, shifter boot around shifter, steering wheel price, front seatbelts, Black kick panels ----- Prices.

How GOOD is the carpet? ----- Price. I just need the front half for my Rampage, in fact all parts are for my Rampage.

Shipping will be to 77520.

I am in no hurry but interested.

Thanks bud!

[Force Fed Mopar]

$55 shipped is too steep for me. I'll just have to wait out for my local yard to bring one in.

No problem. FYI, that harness runs all the way up the driver side to the dash harness.


Hey man, let me know when you get pics of the header panel and how you want me to pay for it!

Thanks,
James

Will probably do so today.


How much for the steering wheel with the horn pad and related hardware to 44121. Thanks!!


Shifter boot on the seat, shifter boot around shifter, steering wheel price, front seatbelts, Black kick panels ----- Prices.

How GOOD is the carpet? ----- Price. I just need the front half for my Rampage, in fact all parts are for my Rampage.

Shipping will be to 77520.

I am in no hurry but interested.

Thanks bud!

Steering wheel and pad are sold already. I just forgot to update the thread. Here is a list of parts sold/spoken for so far:

Manual steering rack assembly
Manual brake master cyl assembly w/ pedal and prop valve
Steering wheel and horn pad
Front fiberglass header panel
Rear aluminum bumper support

54inches I'll price the other parts to you when I get back from work this morning. FWIW the shifter boot on the seat is out of a Conquest.

It may be a couple more day before I get the parts pulled that are spoken for, as we just got 6-8 inches of snow here yesterday and quite frankly, I don't want to go laying about in it getting sick again :) As soon as it clears enough for me to get them off though, I will. Thanks for being patient guys :nod:

[54inches]

Hey brother, no hurries. I don't think the conquest boot will work, thought it was a charger/rampage variety one, but throw it in for free and I will check the fit; you never know. :)

I HATE cold weather, so I understand and I will bother you when I NEED the stuff. I need to get it painted first. :lol:

[Force Fed Mopar]

Hey brother, no hurries. I don't think the conquest boot will work, thought it was a charger/rampage variety one, but throw it in for free and I will check the fit; you never know. :)

I HATE cold weather, so I understand and I will bother you when I NEED the stuff. I need to get it painted first. :lol:

Well, I bought the Conquest boot out of a car at another junkyard, so I'll probably try and get some money out of it on the Starquest forums :) (along w/ a few other TSi parts)

I'll take $60 shipped for the Turismo shift boot, both front seatbelt assemblies (including the buckles), and both kick panels.

[Force Fed Mopar]

84Rampage, here's your pics. I still have to pull the headlight buckets out, but you can see that all the studs are still in it. The nuts all came off pretty good, threads on the studs are still good, and all the cover screws came out good also, so none of them are stripped out either.

[Force Fed Mopar]

Bump, got all the spoken for parts pulled off today.

[Force Fed Mopar]

Bump, I got extra pics of the front fenders and front bumper cover if anyone is interested in them.

[54inches]

Well, I bought the Conquest boot out of a car at another junkyard, so I'll probably try and get some money out of it on the Starquest forums :) (along w/ a few other TSi parts)

I'll take $60 shipped for the Turismo shift boot, both front seatbelt assemblies (including the buckles), and both kick panels.

I will pass on the kick panels; can you take some pics of how the seat belts attach to the B-pillar.

Thanks!!!!

[Force Fed Mopar]

I will pass on the kick panels; can you take some pics of how the seat belts attach to the B-pillar.

Thanks!!!!

I can, I'll get them this week.

[54inches]

Thank you sir! I just need to confirm that they bolt in the same way the Rampage ones bolt in.

[Force Fed Mopar]

Got pics, will post up later tonight.

[54inches]

Awesome!!!!!

[Force Fed Mopar]

Here you go. I meant to look at my Rampage to verify, but it got dark and I forgot :) But I think the Rampage has a shorter roof and may bolt to the B-pillar in stead.

[54inches]

Yes, you are correct it does mount to the B-pillar, but I need to SEE how it actually MOUNTS. :) I have some Daytonas in black and they won't work, so I was hoping a sibling would be the same.

I know it may be a pain, but I need to see UNDER the headliner. :)

Thanks!

[Force Fed Mopar]

Yes, you are correct it does mount to the B-pillar, but I need to SEE how it actually MOUNTS. :) I have some Daytonas in black and they won't work, so I was hoping a sibling would be the same.

I know it may be a pain, but I need to see UNDER the headliner. :)

Thanks!

Ah okay, I gotcha. I'll get to it this week if I can.

[54inches]

No worries brother and THANKS in advance!

[Force Fed Mopar]

Finally got pics :o Hadn't got around to pulling any interior out of this car, but my other '87 parts car already has the interior out, so I got pics of it (same as this '79).

Seatbelt assembly

http://i22.photobucket.com/albums/b331/ForceFedMopar/Parts%20for%20sale/Picture022.jpg

http://i22.photobucket.com/albums/b331/ForceFedMopar/Parts%20for%20sale/Picture023.jpg

Where it mounts on the roof

http://i22.photobucket.com/albums/b331/ForceFedMopar/Parts%20for%20sale/Picture012.jpg

[54inches]

Yep, those probably won't work either, but they look close than the Daytona ones. Do you want to donate them science as I am trying to see which ones WILL work. If not how much do you want for them shipped to Houston?

Thanks bud!

[Force Fed Mopar]

If you want, I can send you this gray one to test with, since it's out. If it works, then you can send it back and buy the black ones from me, sound good?

[Vigo]

Next time you see DodgeZ give him that VW trans to bring back to me.;) :p

[Force Fed Mopar]

Next time you see DodgeZ give him that VW trans to bring back to me.;) :p

Send $125 with him and I'll be sure to do so :thumb:

[Bob the Medic]

Do you still have the steering wheel, column and wiring harness from inside firewall to back brakes?? If so, is column a tilt wheel? Price to NJ 07826

[Force Fed Mopar]

Do you still have the steering wheel, column and wiring harness from inside firewall to back brakes?? If so, is column a tilt wheel? Price to NJ 07826

The steering wheel is gone already, I do still have the column but it is not tilt (none of the L-bodies ever had tilt to my knowledge). All the wiring is still in the car.

[strang3majik]

is that the distributor people mod to work in an n/a 2.2? If so, how much?

[Force Fed Mopar]

I believe it is, not sure though. $40 shipped.

[robs495]

Do you still have the wood dash panel including the glove box? because I would be interested in that.

[Force Fed Mopar]

Do you still have the wood dash panel including the glove box? because I would be interested in that.

Yes I do.

[robs495]

Yes I do.

great... how much do you need? and what type of payments to you accept? I need all 3 pieces...the section around the A/C controls....the section around the radio and glovebox...as well as the glovebox

My email is Robs495@gmail.com

Thanks

[Force Fed Mopar]

great... how much do you need? and what type of payments to you accept? I need all 3 pieces...the section around the A/C controls....the section around the radio and glovebox...as well as the glovebox

My email is Robs495@gmail.com

Thanks

I'll check them and make sure all three pieces are good and let you know. I take PayPal if you have it.

[vntned]

Spoiler to 27215?

[Force Fed Mopar]

Spoiler to 27215?

$75 shipped.

[strang3majik]

I believe it is, not sure though. $40 shipped.

Nah, I'll pass. They're $55 new.

[Force Fed Mopar]

Nah, I'll pass. They're $55 new.

So make me an offer :)

[vntned]

Payment sent for spoiler. Please let me know via PM when it ships out. Thanks.

[robs495]

I'll check them and make sure all three pieces are good and let you know. I take PayPal if you have it.


I do have paypal...just checking on their condition

[Force Fed Mopar]

Payment sent for spoiler. Please let me know via PM when it ships out. Thanks.

Will do, I will try and get it off tomorrow.


I do have paypal...just checking on their condition

Same for you, I will check their condition tomorrow while I am there and if they are good, I will pull them also and let you know.

[RoadWarrior222]

Next time you see DodgeZ give him that VW trans to bring back to me.;) :p
Turbo diesel? In what?

[Force Fed Mopar]

Got all the parts pulled today. Robs495, those woodgrain panels are all nice, so I got them off too.

[robs495]

Got all the parts pulled today. Robs495, those woodgrain panels are all nice, so I got them off too.

PM Sent

[vntned]

Hey, did the spoiler ship yet? Just curious.

Thanks

[Force Fed Mopar]

Hey, did the spoiler ship yet? Just curious.

Thanks

Not yet, I am trying to get it boxed up properly today. I don't want it arriving w/ the corner broke off or something :)

[RoadWarrior222]

Try a carpet place, see if they have a tube from the middle of a roll that it will fit in.

[vntned]

Cool. Its for my brother in laws SC and we are hopping to get it before next Friday. We are going to a show Saturday and would like to have the time to prep, paint and fit it before we leave early Sat morning. Thanks.

[Force Fed Mopar]

Ned and Rob, your parts are shipping today, barring any work-related emergencies :)

[Force Fed Mopar]

Ned and Rob, your parts are shipping today, barring any work-related emergencies :)

UPS has them boxed, they will go out Monday morning. So you should have your spoiler Tuesday, Ned, since you are just the next state up.

[Force Fed Mopar]

Bump, car will be going to the crusher soon. BTW the hatch was clean under the spoiler, no rust.

Also have an '87 Charger parts car that's gonna be headed that way soon too, if anyone needs something from it. I'm using the floor out of it for my GLHS. 2.2 auto car.

[a89mini]

Rob

PM sent----------->



Richard:-)

[Force Fed Mopar]

Replied to :)