end of year clearance!!! lots of HI-PO and NOS parts

[Juggy]

heres the starting list.....may have more to add later. this is everything i can think of for the time being...let me know if your interested in anything or need pics! thanks.

Valvetrain:

- MP 061 springs, some surface rust from sitting $20

Engine:

- 1 piece turbo valve covers blasted and painted black $15 each
these are really clean and in nice shape!

- set of T2 rods, freshened and ready to run with ARP bolts, resized, top
oiling hole drilled, casting lines removed, sized for .912 pin, $125

- 1989 2.2L common block oil pans $30 each

- 2.5L CB oil pans $20 each

- A/C delete brackets $10 each, 4? or so to pick from (priced low because of
shipping costs to the US.....) *ALL PENDING*

- NOS 445 G head.complete but you have to reassemble the head, as I
dismantled it as I was going to have it worked and ported. $200

Suspension

- Koni Adjustable Struts with coilover springs, for daytona, shadow, spirit, etc....$400 rebound nice, very fast n firm *pending*

[Spr-T-23]

would it be hard to get that one piece over to the D?

[Juggy]

would it be hard to get that one piece over to the D?

Im fairly certain I can get it over for you. i just cant cross myself :(
if u have a passport or enhanced license i am literally 5 minute drive from the bridge....

[Spr-T-23]

no i dont thats why i was asking, maybe someesle local will buy off you and we can get something going from that. im very interested in the 1 peice, im going that direction with my build

[Juggy]

ok no prob. ill see what i can do! def hope some locals snag up some of these dealios :)

[Juggy]

TTT

marked some items that have sold/pending. and made it easier to read.

[bakes]

need some pics of the stuff Cory.

[Juggy]

need some pics of the stuff Cory.

yeah been super busy with PM's and stuff. moving pics through email. and I ended up porting the 2 piece intake myself since I wasnt happy with the work that was done to it. first guy in line did not pass it up, thats all I can say...I am very pleased with the port work now :evil:

but dont hesitate to ask guys. getting overloaded with messages and I tend to take care of those first!

stuff is moving FAST....so if your interested in something, do not hesitate!

[Spr-T-23]

yea im kinda itching to see what im getting, post up some pics for me if you can. ill run the DEI with that ported intake, it'll be super fast.

[Spr-T-23]

c'mon dont make me wait....

[Spycker]

if you still have the " - 1 Set of +40% injectors "586" mileage approx 5000km $100 " on january 12th, ill take them

[Juggy]

lol ill get you some pics of the intake, just PM me your email

spycker. there has been no interest in the injectors so far, I will mark them pending if your seriously interested in them.
shipping to cali will be no more then $20. you asked about the rods too right? ill have to get you some pics of those to an email addy. not sure if u gave me one or not?

[Radiant_Red]

let me know about that cam and stuff i talked about

[Juggy]

let me know about that cam and stuff i talked about

everything is in the house now. just gotta pull the stuff of the head.

[Juggy]

pics of parts, if u need pics of something just ask

[Juggy]

bump. updated the list, and some prices have been lowered.

[Juggy]

bump
updated the list! it has been a very successful sale so far. thanks guys!!! still a few good things left tho

[Spr-T-23]

happy with what i got, wish i had some more money to get other stuff.

[Juggy]

bump it up

[Juggy]

rad spoken for locally. JE used piston/rod combo pending

[89Aries]

What's the deal with the Koni Adjustable Struts with coilover springs, for daytona, shadow, spirit, etc....$400 rebound nice, very fast n firm are they still for sale? and will they fit an aries k car?

[Juggy]

yes they will fit your K car. and i need to get a shipping quote out your way....so if the first buyer doesnt take them youll know how much shipping will be :)

[89Aries]

Sweet I really want these... so its the complete front coil over setup only no back right?

[Juggy]

Sweet I really want these... so its the complete front coil over setup only no back right?

that is correct.

[89Aries]

If you let me know how much I'll send the money asap. I really need these.

[gerbot_3000]

if the JE and rods still available i want them.

[Juggy]

If you let me know how much I'll send the money asap. I really need these.

ill get a quote 2day and let all interested parties know!


if the JE and rods still available i want them.

sorry, the JE/rod combo has been sold. the interested buyer came through and put a deposit down on them last night.

---------- Post added at 10:16 AM ---------- Previous post was at 10:13 AM ----------

also added

1 piece turbo valve covers. these have been blasted clean and re painted black.
have 2-3 really nice clean ones that have very little use to them since being refurbed

[89Aries]

Sounds good

[neongary]

I sent you my e-mail address on 1-22. Still waiting for those pics of a oil pan.

[Juggy]

I sent you my e-mail address on 1-22. Still waiting for those pics of a oil pan.

sorry my bad, 2.2 pan right?? ill get you some 2morrow.

[neongary]

sorry my bad, 2.2 pan right?? ill get you some 2morrow.
Wow, somebody just doesn't want to sell this!
Forget it.