782 Heads, Disc Brake Conversion, 2.2 TBI Engine

[89Aries]

Prices Lowered!!! Everything is OBO!!!! (+shipping) Call or text Nick (609) 439 6077


2.2 TBI Intake manifold 15

2.2 TBI Exhaust manifold 15

2.2 TBI Airbox 15

2.2 TBI Map Sensor 10

2.2 TBI Stamped steel valve cover with steel splashback piece 30

(2) Plastic timing belt covers great cond tab for ign wire is not broken!!! 20 each

Stock 782 head from an 89 aries tbi, complete, cleaned, no cracks between cylinders, comes with everything but cam, would make a great stock replacement, or lap in 4 turbo exhaust valves and good to go! 100 +shipping I do have a spare turbo cam I can throw in for an extra 20

11" disc brake setup: front from 89 dodge daytona, includes rotors calipers hubs spindles prop valve master cylinder, back: rear axle from dodge omni disc brake conversion, 5 lug, bearings spin freely, includes everything but the disc brakes $50 ABOUT TO BE SCRAPPED

Dodge Daytona 5 spd shifter boot $10

chrome window/door trim off of my 89 aries 4 door good condition $20

T1 1 pc intake manifold painted hemi orange, fins sanded, includes stock t1 rail and regulator, nice looking piece 70 +shipping

Also have matching hemi orange painted chrysler turbo 1 pc valve cover fins also sanded 50 +shipping

52mm throttle body $20

Burgandy steering wheel 89 chrysler $15

7x6 headlights $10

I'm looking for a wrinkle black valve cover and will accept trades for some of my extra parts. Has to be a really nice wrinkle black though, if you have a direct connection one i would prefer it, if not shelby, or chrysler turbo, or ?? let me know!

[Juggy]

pics of the head?
the ported one...

[Spycker]

pics of the head?
the ported one...

I would like to see some pictures as well

[austinlarg]

Pictures of the:

- Console
- Magnaflow exhaust

Thanks!

[89Aries]

I apologize for the slow reply my notifications were not set up. The magnaflow is still available, the console is in rather rough shape, grey-blue, but I'll part with it for cheap.

BTW I can't post pictures up here, If you're interested in anything send me your email address and I'll send them to you.

[thedon809]

Damn, if you were closer I would pick that engine up asap.

[89Aries]

No one is interested in it so I am parting it, if you need any TBI parts off a complete running engine pm me and we'll work out a deal. This will be junked soon so speak up now. I just want it gone.

[thedon809]

How much for the crank? I can get a common block from the jyard for 50, but i want a 2.2 and they are all 2.5s.

[89Aries]

How bout $20 +shipping, does that sound reasonable? I'll have to check on shipping cost though. Let me know what you wanna do.

[135sohc]

Whats the oil pan look like ?

[89Aries]

Its good, like I said everything is off a running engine. How about $20 +shipping, let me know what you wanna do. Thanks

[moparman76_69]

Sleeperspirit's "782 mex head with stock valves, lapped, cleaned, ported a bit, cleaned up all the castings in the runners.... $100 bux (what i steal i spent like 8 hours on porting it!)" I was going to put on my car, decided not to



Still got that? if so I'll pm you for pics.

[89Aries]

Port/polish 782 head sold... offers guys I need to move this stuff!!!! If your interested and don't have the $$ I may be interested in trades, I need a set of springs, either pro kit or coil overs....

[csomni]

what year is the head, does it have the oilers in the cam caps
Stock 782 head, cleaned $70

[89Aries]

The head is an 88 its from a lebaron 2.2 t1 it comes with the cam because i think its osj (this cam was too big for my other two heads) As for the oilers in the cam caps, I'm not up on my heads sorry, if you could explain it to me I could take a look for you. It is complete though, have the valve springs and misc parts in a box. Missing one valve. It was cleaned at the machine shop it has a few small cracks pm for pics 50 +shipping.

[89Aries]

How much for the crank? I can get a common block from the jyard for 50, but i want a 2.2 and they are all 2.5s.


Whats the oil pan look like ?

Haven't heard back from you guys, if you're still interested in these parts they are available, and if the price is an issue I will work with you.

[csomni]

there should be a osj stamped on the left side of the head if its oversized. which im not interested. as far as the cam caps go there should be little groves cut in the cap to supple oil to the rockers. they quit cutting them in . cant remember what year. they were for the slider cams. if they get plugged you can wipe out a slider in a hurry. i like useing on the roller cams. that way i no there gettting the oil

[89Aries]

there should be a osj stamped on the left side of the head if its oversized. which im not interested. as far as the cam caps go there should be little groves cut in the cap to supple oil to the rockers. they quit cutting them in . cant remember what year. they were for the slider cams. if they get plugged you can wipe out a slider in a hurry. i like useing on the roller cams. that way i no there gettting the oil

Like i said its from an 88 lebaron t1 motor.. which i'm pretty sure its the later style (roller?) cam. There is no osj stamped in this head, i looked it over like 4 times, but this cam and head have larger journals by about 1/4" compared to the other spares i had. So i'm including the cam with this head. I need it gone so if you're interested I can send pics to your email address and you can decide from there if you are interested.

[89Aries]

Bump!!!

[89Aries]

Bumpski

[89Aries]

Bump any takers on parts

[89Aries]

Bump!!!

Aries grille, tbi throttle body assy., one piece intake mani, magnaflow all SOLD!!!

Also I have a spare stock 782 head for sale, great condition, cleaned, no cracks between cylinders, great replacement for 2.2, 2.5 tbi or swap in 4 turbo exhaust valves and have a good cheap turbo head. $150 shipped

I'm selling the front suspension setup from my dodge aries, only 500 miles on whole setup. Cut shelby lancer springs mounted on monroe struts, firm ride, a bit hard over bumps though, but it handles sweet. Lower ride height by about an inch. Upgraded to coilovers which is why I'm selling. This setup is almost new. Comes with everything to bolt in and go. I'd like to get $150 shipped, let me know!!!

[89Aries]

Bump!!!

[89Aries]

Bump! No takers???

[89Aries]

Bump!!! I got a huge box of parts about to go up.