New Super 60 Engine, Trans, etc.

[mr.ed]

I was originally going to post these a few parts at a time, but it was suggested that I just post the list with prices. This is better, now that I think about it, especially if someone wants multiple parts and wants to combine shipping. Keep in mind that all parts are NEW N.O.S. unless otherwise indicated. OK, so here we go...

Prices do not incude shipping. I may be inclined to deliver large/heavy items within a reasonable distance from Hopewell Junction, NY, we can discuss this when the time comes. Some items are sold already, sorry. If you need more info or pics please let me know, however I ask that you PLEASE be patient. I'll respond as quickly as I can and in the order received. BTW, everyone I've spoken to on this site has been aces :thumb:. Thanks for the warm welcome!

Ed

Photos:

http://img153.imageshack.us/img153/1417/62688215.th.jpg (http://img340.imageshack.us/slideshow/webplayer.php?id=480z0.jpg)

The List:

Part Number Description Price
4483477 - Turbo 2 Short Block, O-Ringed , Disassembled, Missing Crank - $600
4762697 - Transmission Assy. A-568, Large Spline, 3.3:1 first gear - $900 PENDING
P4529135 - Flywheel, Aluminum 8-BoltSOLD
P5249331 - MP Intercooler - $200
NPN----- - JE Piston Pkg Std Bore w/lightweight pins, locks & ringsSOLD
4343481 - Manifold, Exhaust - Turbo 2 - $50
NPN----- - Turbo Support Bracket **USED** - $5
4621172 - Pump, Water - $30
NPN----- - Tube, Oil Pickup - $5
5203325 - Retainer, Intermediate Shaft Seal - $15
4483162 - Pulley, Water Pump - $5
NPN----- - Lifter, Hydraulic - Set of 8 - $40
4671130 - Starter w/heat shield & clip - $75
4720822 - U-joint Kit, 5212991 Yoke, 5212992 Shaft, - $140
4504007 - Bracket, Intermediate Shaft Bearing - $30
5212932 - Bearing, Axle Intermediate Shaft, 5212962, Slinger, 5212975 Slinger, 5212964 SealSOLD
4641172 - Joint Kit, Outer CV w/boot - Sprit R/T - 2 Available - $75/ea
4641177 - Inner CV Assy. & Boot Pkg. - Spirit R/T - 2 Available - $75/ea
5212711 - Tripod, 5212740 Spring - $20
5277873 - Hose Intercooler, Spirit R/T - $45
5227333 - Solenoid Assy. - $50
4443455 - Filter, Fuel - $5
4275317 - Clip, Fuel Injector - Set of 4 - $5
5212535 - Seal, Wheel Bearing - 2 Available - $5/ea
6031594 - O-Ring, Distributor - 4 Available - $1/ea
TB000153 - Belt, Timing - $10
4343946 - Belt, Timing - $10
NPN----- - Bushing, Oil Pump/Distributor Intermediate Shaft - $60
NPN----- - Spring, G-Body Front Heavy Duty - Set of 2 - $20
4147892 - Spring, G-Body Rear Heavy Duty - Set of 2 - $20
4670220 - Shifter Assy. Neon? - $75
4437511 - Cable, Speedometer - $20
4449052 - Knuckle, Steering R w/bolt in bearing/hub - $90
4449053 - Knuckle, Steering L w/bolt in bearing/hub - $90
4684643 - Mount & Bearing, StrutSOLD
NPN----- - Garrett Stage 3 Turbo modified by Turbonetics - $800
RO400203 - Mopar Reman Steeing Rack, Firm Feel - $100

[wheming]

Can I reserve both cast control arms?
I'm dealing with an issue finding bushings for my stamped ones.
Can I have dibs for a few days until I figure out if I need them?

And, how much for both shipped to 27527?
Thanks!
Oh, and another question, With or without ball joints?

[mr.ed]

Can I reserve both cast control arms?
I'm dealing with an issue finding bushings for my stamped ones.
Can I have dibs for a few days until I figure out if I need them?

And, how much for both shipped to 27527?
Thanks!
Oh, and another question, With or without ball joints?

If someone else asks for them I'll contact you first and give you a chance to buy them. If you decline at that time, I'll have to sell them to the next buyer. Sound fair?

Each arm comes complete with bushings, ball joint and boot, ready to bolt in!

Shipping should be around $20.

[glhs727]

PM sent!
I'll take:
NPN----- - JE Piston Pkg .25mm OS w/lightweight pins, locks & rings - $250
4452198 - MP/ARP Head Stud Pkg. - $50
4343428 - Shaft, Intermediate Oil Pump & Distributor - $40
4419960 - Hose, Radiator - $10
4266951 - Hose, Radiator - $10
4419954 - Hose, Intercooler - $60
4504339 - Cable, Shifter, P-Body - $50
4504342 - Cable, Shifter, P-Body - $50

[168glhs1986]

Duplicate post

[168glhs1986]

Also can you tell me more about the turbo modified by turbonetics. When modified and what was done? Will it support 350hp?

[168glhs1986]

I'll take the throttle body for $80.

Also I'll take the dipstick and tube for $10.00

[mr.ed]

Also can you tell me more about the turbo modified by turbonetics. When modified and what was done? Will it support 350hp?

I knew this was going to come up sooner or later :D! I sent a brand new T2 turbo to Turbonetics for upgrades. Here's exactly how the invoice reads:

UPGRADE CUST CHRYSLER T3 TC AS FOLLOWS
TO4B SUPER TURBO, LESS T.H. SUPER S/STG III WET CS
LABOR, RE-CONTOUR C.H. - IN
LABOR, RE-CONTOUR T.H. - IN
2 1/2 CHRYSLER SWING VALVE

The mods were done in '98 and cost me $650 in addition to the turbo itself. I was told it will support approximately 550HP.

[moparman76_69]

RO400203 - Mopar Reman Steeing Rack, Firm Feel - $100

What body style is that for?

[mr.ed]

What body style is that for?

It's for a G-Body but I know for sure it will fit H's and J's also. Maybe P's and K's too, not sure though.

[John B]

I'll take the S60 cam for $75. PM sent

[87CSX603]

pm sent

[GLHNSLHT2]

Can I reserve both cast control arms?
I'm dealing with an issue finding bushings for my stamped ones.


Energy suspension makes bushings for the stamped 89/90 arms now. Part #5.3135 Google search brings up lots of vendors for it.

[glhs727]

Can I reserve both cast control arms?
I'm dealing with an issue finding bushings for my stamped ones.


Polybushings.com makes some, and we have them in stock.....

[DevoBuzz]

I'll take the Super 60 fuel pump and Nippenso alternator.

Thanks,
Ralph

[mr.ed]

I'll take the Super 60 fuel pump and Nippenso alternator.

Thanks,
Ralph

Sale pending on the fuel pump. The alternator should be $12 to ship.

[DevoBuzz]

OK - alternator only then. How do you want payment sent?

[turbovanman²]

If the oil pump body is aluminium, I'll take that and the front and rear seals. Shipping to 98230.

[mr.ed]

If the oil pump body is aluminium, I'll take that and the front and rear seals. Shipping to 98230.

Sorry, oil pump is sold. Sorry about the delay in updating the thread :o. Are these what you need: 4387580 Retainer, Front Crankshaft Seal 5214783 Retainer, Rear Crankshaft Seal?

Shipping $7

Ed

[turbovanman²]

Sorry, oil pump is sold. Sorry about the delay in updating the thread :o. Are these what you need: 4387580 Retainer, Front Crankshaft Seal 5214783 Retainer, Rear Crankshaft Seal?

Shipping $7

Ed

Crap.

No, the front and rear seals and might as well take the fuel filter too. Thanks.




4443455 - Filter, Fuel - $5
4275317 - Clip, Fuel Injector - Set of 4 - $5
5212535 - Seal, Wheel Bearing - 2 Available - $5/ea
NPN----- - Seal, Crankshaft Front - $5
6031594 - O-Ring, Distributor - 4 Available - $1/ea
5203530 - Seal, Crankshaft Rear - $5

[mr.ed]

List is finally up to date. I lowered some prices as well. My apologies to anyone who missed out, I've been so swamped, I only recently took a break to eat. I skipped breakfast and lunch! It's OK though, as I could stand to lose a few pounds :D. Thanks to everyone so far for their purchases and their patience! Ready for round 2!

[BadAssPerformance]

6031594 - O-Ring, Distributor - 4 Available - $1/ea
NPN----- - Spring, G-Body Front Heavy Duty - Set of 2 - $20
4147892 - Spring, G-Body Rear Heavy Duty - Set of 2 - $20


Wow, you've been busy! ;) Interested in the above... those are the -1 inch springs or the +1 inch springs?

Also, I didnt look at the pictures yet, what comp cover is on the Turbo T04 B or E?

Thanks.

[tommy]

Wow, you've been busy! ;) Interested in the above... those are the -1 inch springs or the +1 inch springs?

Also, I didnt look at the pictures yet, what comp cover is on the Turbo T04 B or E?

Thanks.

I think its a B JT.

[wheming]

If someone else asks for them I'll contact you first and give you a chance to buy them. If you decline at that time, I'll have to sell them to the next buyer. Sound fair?

Each arm comes complete with bushings, ball joint and boot, ready to bolt in!

Shipping should be around $20.


I'll just take them, i could always have spares for my Spirit.
I'll also take (2) 4684643 strut mount/bearing

I'll PM you my paypal if you could send me an invoice.


And to Cindy and the other reply,
I only deal with Johnny at PolyBushings for all my bushing needs. But the bushings I bought don't fit snug. He is working with me to find out what is different about these stamped arms, but thought using these arms with poly bushings from him might be easier to sort out.
Thanks for the suggestions though!

[mr.ed]

Crap.

No, the front and rear seals and might as well take the fuel filter too. Thanks.




4443455 - Filter, Fuel - $5
4275317 - Clip, Fuel Injector - Set of 4 - $5
5212535 - Seal, Wheel Bearing - 2 Available - $5/ea
NPN----- - Seal, Crankshaft Front - $5
6031594 - O-Ring, Distributor - 4 Available - $1/ea
5203530 - Seal, Crankshaft Rear - $5

Only the fuel filter left, sorry! Sent you a PM.

[mr.ed]

Wow, you've been busy! ;)
Yeah, no kidding! It's great, though!


Interested in the above... those are the -1 inch springs or the +1 inch springs?
Neither, they're not the MP springs but HD factory replacements.



Also, I didnt look at the pictures yet, what comp cover is on the Turbo T04 B or E?
Thanks.

My invoice from Turbonetics says TO4 B

[wheming]

those cast control arms are for AA body right? I had a hard time finding anything other than years used 91-95.
Thanks.

[mr.ed]

Shorter list. Here's what's left:

Part Number Description Price
4483477 - Turbo 2 Short Block, O-Ringed , Disassembled, Missing Crank - $600
P5249331 - MP Intercooler - $200
4343481 - Manifold, Exhaust - Turbo 2 - $50
4621172 - Pump, Water - $30
5203325 - Retainer, Intermediate Shaft Seal - $20
4483162 - Pulley, Water Pump - $5
NPN----- - Lifter, Hydraulic - Set of 8 - $40
4671130 - Starter w/heat shield & clip - $80
4720822 - U-joint Kit, 5212991 Yoke, 5212992 Shaft, - $140
4641172 - Joint Kit, Outer CV w/boot - Sprit R/T - 2 Available - $75/ea
4641177 - Inner CV Assy. & Boot Pkg. - Spirit R/T - 2 Available - $75/ea
5212711 - Tripod, 5212740 Spring - $20
5277873 - Hose Intercooler, Spirit R/T - $50
5227333 - Solenoid Assy. - $50
4275317 - Clip, Fuel Injector - Set of 4 - $5 shipped
5212535 - Seal, Wheel Bearing - 2 Available - $5/ea
6031594 - O-Ring, Distributor - 2 Available - $1/ea
TB000153 - Belt, Timing - $10
4343946 - Belt, Timing - $10
NPN----- - Bearing, Oil Pump/Distributor Intermediate Shaft - $60
4670220 - Shifter Assy. Neon? - $75
4437511 - Cable, Speedometer - $15
4449052 - Knuckle, Steering R w/bolt in bearing/hub for BIG BRAKES! - $90
4449053 - Knuckle, Steering L w/bolt in bearing/hub for BIG BRAKES! - $90
NPN----- - Garrett TO4B Stage 3 Turbo modified by Turbonetics - should support up to 550HP $800
RO400203 - Mopar Reman Steeing Rack, Firm Feel - $100

[turbovanman²]

those cast control arms are for AA body right? I had a hard time finding anything other than years used 91-95.
Thanks.

Those will fit ANY TM from 91-95.

[turbovanman²]

Got pics of the inner cv joints?

[mr.ed]

Got pics of the inner cv joints?

Comin' right up!

[mr.ed]

4641177 - Inner CV Joint Kit
$75/ea. Spirit R/T Inner joint comes with tripod, spring, cup, snap ring, boot, clamps and grease - some assembly required (batteries not included)
http://img29.imageshack.us/img29/7585/img0001y0.jpg

4641172 - Outer CV Joint Kit
$75/ea. Also for Spirit R/T comes with boot, clamps and grease
http://img189.imageshack.us/img189/7163/img0002uh.jpg

4720822 -U-joint Kit
5212991 -Yoke
5212992 - Shaft
$140 for all three. Again, Spirit R/T pieces, everything you need to build your very own intermediate shaft
http://img689.imageshack.us/img689/9059/img0003gmu.jpg

4504007 - Bracket
5212932 - Bearing
5212962 - Slinger
5212975 - Slinger
5212964 - Seal
6101299 - Screw
6500158 - Screw
SOLD. You guessed it! Spirit R/T parts, intermediate shaft support bracket, bolts, bearing, etc. - BTW, bearing is made in Italy :eyebrows:. Just thought you'd like to know.
http://img577.imageshack.us/img577/1259/img0004bn.jpg

[BadAssPerformance]

Yeah, no kidding! It's great, though!

Neither, they're not the MP springs but HD factory replacements.

Interesting, didnt know they made those, I wonder if they have the same or different spring rates?


My invoice from Turbonetics says TO4 B

The note you posted was refering to the comp wheel being a Super S which is a "B" wheel, but the picture posted shows a T03 cover. Good and bad to this... good cuz it looks stock and everything fits stock, bad cuz the larger 04housings run cooler at higher boost. Regardless, a great deal for the price :thumb:

http://desmond.imageshack.us/Himg812/scaled.php?server=812&filename=150c0.jpg&xsize=640&ysize=640

[mr.ed]

Interesting, didnt know they made those, I wonder if they have the same or different spring rates?

I have no idea what the rates are. These had a tag with "HD" and the last 3 of the part number on them. I had Mopar springs tagged "XHD" on my 'Tona.