PDA

View Full Version : General: Garage Sale NE OHIO



BIG PSI
11-22-2010, 06:09 PM
I am starting to sell off all of my Turbo-Mopar Parts.
Most of them are either NEW or media blasted and painted.

This is list Number ONE (I will start another list later)
NOTE: some prices will include shipping to the lower 48. (they have a *)
(some you if you see S/H then you pay to have it shipped)

MSD Blaster 2 Coil New in original package (painted Twlight Blue) $35.00 S/H--- SOLD

Aftermarket Aluminum Inter-Cooler NEW------------------------$150.00 S/H
{the fins measure 20" L x 9.25" high c 2.75" thick}
overall measurements are: 28" L from inlet to outlet pipes
10.50" T from mount point to mount point
The inlet & outlet pipes measure 2.50" on the outside

Stock T-2 Two Piece Intake Manifold, comes with the top/bottom/
injector harness/33.25 lbs injectors/good fuel rail/46mm tb
I may have the stock FPR it so that will come with it------------$220.00 S/H
SOLD to 87daytonapac

Set of FIVE Service Manuals for the 1990 Models----------------$100.00 S/H

One 1989 Service Manual---------------------------------------$ 25.00 S/H

One Fuel Injection by Mopar Service Manual---------------------$15.00 S/H

ARP 11mm Head Studs NEW in the original box-------------------$80.00 S/H
SOLD pending payment

Misc Bolts/Nuts in their original wrappers------------------------$20.00 *

Non A/C Bracket, media blasted then painted in Heavy Metal Flake Silver with clear and new bushings (perfect)--------------------------------$60.00 S/H--SOLD pending payment

Used set of +20's Fuel Injectors with o-rings---------------------$100.00 *

New pair of 89/90 Mini Van front side lenses----------------------$40.00 *

New pair of 89/90 Mini Van front turn signal lenses----------------$60.00 *

New T-2 Lower Inter-Cooler Hose--------------------------------$60.00 S/H

New Oil Line-----------------------------------------------------$25.00 *
SOLD pending payment

Dist Clamps, media blasted and painted (your choice)-------------$5.00 ea *

New Hayden Transmission Cooler (still unopened)-----------------$40.00 S/H

More will be posted Friday

Chuck Green

YOU MUST POST IN HERE WHAT YOU WANT !!!! (no pm's)
As it will be first post gets dibs

BIG PSI
11-22-2010, 06:15 PM
More Photos of stuff for sale:

Chuck

BIG PSI
11-22-2010, 06:17 PM
Still more photos:

BIG PSI
11-24-2010, 09:10 AM
Guys if you feel that I am to high on a price PM me a reasonable offer.

TopDollar69
11-24-2010, 03:34 PM
Is the oil feedline for a TII garrett?

BIG PSI
11-24-2010, 07:21 PM
TTT once more

TonaChris
11-24-2010, 07:49 PM
Are you getting out of tm's?

BIG PSI
11-24-2010, 10:03 PM
Are you getting out of tm's?

I am just changing directions so to say.

LOL

Orangetona
11-24-2010, 10:08 PM
I am just changing directions so to say.

LOL

16V sitting on a 2.5? :eyebrows:

87DaytonaPac
11-24-2010, 11:35 PM
Chuck, could you possibly post up a pick of the underside of the top section of the 2 piece? I already have an offer on another 2 piece but I might be interested in yours as well if it has what I'm looking for.

--Paul

BIG PSI
11-24-2010, 11:45 PM
Chuck, could you possibly post up a pick of the underside of the top section of the 2 piece? I already have an offer on another 2 piece but I might be interested in yours as well if it has what I'm looking for.

--Paul

I will do so tomorrow

Chuck

87DaytonaPac
11-25-2010, 12:11 AM
I will do so tomorrow

Chuck

Okay Thanks!

csomni
11-25-2010, 01:18 AM
are those intake manny bolts . and are they mps

csomni
11-25-2010, 02:35 AM
will you take 10.00 for the Misc Bolts/Nuts in their original wrappers------------------------shipped

BIG PSI
11-25-2010, 09:50 AM
will you take 10.00 for the Misc Bolts/Nuts in their original wrappers------------------------shipped

I would do $15.00 shipped

:nod:

STEVE B
11-25-2010, 02:05 PM
Will you take $70 for the 11mm studs shipped?

BIG PSI
11-25-2010, 02:25 PM
Chuck, could you possibly post up a pick of the underside of the top section of the 2 piece? I already have an offer on another 2 piece but I might be interested in yours as well if it has what I'm looking for.

--Paul

Paul here are the photos you asked for

BIG PSI
11-25-2010, 02:25 PM
Will you take $70 for the 11mm studs shipped?

Steve the best I will do for now is $80 SHIPPED

LMK

Chuck

BIG PSI
11-27-2010, 06:34 PM
TTT once more

4cefedomni
11-27-2010, 06:41 PM
If Steve doesn't take the head studs I will. You can put them in with the crank scraper

Don

87DaytonaPac
11-27-2010, 10:05 PM
Paul here are the photos you asked for


I'll take it! Shipping zip is 16802 University Park. PM me your Paypal address and the total when you're ready.

--Paul

BIG PSI
11-27-2010, 11:13 PM
I'll take it! Shipping zip is 16802 University Park. PM me your Paypal address and the total when you're ready.

--Paul

Paul I will get a price quote for you Monday as well.

Chuck

BIG PSI
11-29-2010, 05:20 PM
Quotes have have sent out by PM...

marbuch
12-01-2010, 07:34 PM
wILL YOU TAKE 50.00 FOR LOWER HOSE SHIPED

BIG PSI
12-01-2010, 07:44 PM
wILL YOU TAKE 50.00 FOR LOWER HOSE SHIPED

I would do $55.00 Shipped.

LMK

BIG PSI
12-04-2010, 12:45 PM
TTT once more

TopDollar69
12-05-2010, 12:05 AM
Any idea if that oil line is sold for sure?

wheming
12-05-2010, 01:32 AM
too bad I didn't see this sooner I bought new signal lights and side markers about a month ago!

BIG PSI
12-05-2010, 08:46 AM
Any idea if that oil line is sold for sure?

I have not received payment yet.
Give me until Tuesday afternoon mail, if payment is not here it is YOURS.

Chuck

BIG PSI
12-06-2010, 02:19 PM
Stock two piece intake setup has been SOLD.

Thanks to 87daytonapac aka Paul.

BIG PSI
12-16-2010, 04:25 AM
TTT once more