Revised L-Body shifter & linkages

[87DaytonaPac]

Looking for the revised shifter and linkages that were available on the later l-body cars. I need the whole set up all the linkages, brackets, clips, etc. I plan to upgrade my 83 Rampage.

[csomni]

i think most of us are doing our own up grade . this might help you out ( Hybrid Heim Shifter ) its in the (http://www.turbo-mopar.com/forums/vbarticles.php) of this forum. ive got my parts i just have to get around to doing it.

[87DaytonaPac]

No no. I am aware of the heim mod and was planning to do that to my shifter as well. However, my shifter is the first gen style that bolts to the K-frame and is a little different than the 2nd gen revised style that bolted to the transmission differential. It is that 2nd gen style that I want to get and then do the heim mod to.

[csomni]

oh. so all you need is the pivit point that bolts to the the tranny. i got my linkage to work on a turbo ,had to do some small mods. i used one off a 90 omni on my 84. worked out good. dont have a exta. had to buy one for my next project. but im sure somre one does on this sight or the td sight.

[87DaytonaPac]

I think the different pivot point changes the other linkages as well. Rather than get one piece then discover I need others, I thought I'd just get everything and be done.

[csomni]

ya, that way you can just swap out the parts. oh fore got to ask do you have a 4 speed or 5 speed

[black86glhs]

I have the shifter and main rod from my 86 GLHS up for sale if they are what you are looking for.

[87DaytonaPac]

ya, that way you can just swap out the parts. oh fore got to ask do you have a 4 speed or 5 speed

I think it's a 5-speed.

[87DaytonaPac]

I have the shifter and main rod from my 86 GLHS up for sale if they are what you are looking for.

Thanks but I'm really looking for the whole assembly.

[black86glhs]

Oops, this got buried. No problem, thought I would offer.:D