View Full Version : 904 input shaft
ohiorob
09-23-2010, 01:23 PM
looking for one for the a413. made some phone calls with no luck.
turbovanmanČ
09-23-2010, 01:28 PM
http://www.turbo-mopar.com/forums/showthread.php?t=3746&highlight=input
ohiorob
09-23-2010, 08:45 PM
Coanracing do not carry them anymore. talked to RacerSteve today and he pointed me in the right direction. $450 holy crap, I paid $350 for mine way back when.
turbovanmanČ
09-23-2010, 09:34 PM
Good info, I've never called them so this is bad news.
Who makes them now so it can be updated. Maybe I should see how much I can get some made for and keep the original size so you don't need a custom TC.
ShelGame
09-23-2010, 11:42 PM
John Donato made them originally...
69viper
09-24-2010, 12:52 AM
John Donato made the input shaft for my car. I forget how much is was. Maybe $400.
http://www.turbo-mopar.com/forums/showthread.php?t=36105
Pat's Performance Converters made up the converter w/904 splines. I talked to Steve there and I think it was about $600.
http://patsperformanceconverter.com/
MR. X
09-25-2010, 11:59 PM
I can make them if there is a group buy. Anyone have a working sample to verify part against?
Speedeuphoria
09-26-2010, 01:13 AM
Well I'm in MI and have 1 buts its in the car
MR. X
09-26-2010, 04:41 AM
Bummer. I need to get the cv shafts quoted. The same shop can make the input shafts also.
turbovanmanČ
09-27-2010, 01:39 AM
I have the stock LU shafts but I honestly don't think there's much market, its more like a made on order type item.
MR. X
09-27-2010, 03:10 AM
If they are one offs its going to be like $800 for one. If there is quantity then the price goes way down. I would still like to design one up though.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.