PDA

View Full Version : 2.2 TI log to TI one piece TB wireing


zkeifer
09-11-2010, 10:53 PM
okay so i have and 85 omni glh and right now at this exact moment i just put the head back on after replacing the head gasket and i put the one piece intake manifold on and was going to intercool it for future TII. my problem right now is throttle body and the sensors the connectors dont match, their are more pins on the 46mm TB then what is on the log TB what to do my car is almost back on the road this is whats holding is up right now
black86glhs
09-11-2010, 11:31 PM
The T-IIs got the 4 wire TPS. They were added by Shelby on the GLHSs when they performed the swap.
Look at allpar.com for the Logic module pinouts so you can add them.
87CSX603
09-11-2010, 11:43 PM
he dosent have a TII computer still TI but he changed the manifolds and is going to TII it in the future just not yet
black86glhs
09-11-2010, 11:49 PM
he dosent have a TII computer still TI but he changed the manifolds and is going to TII it in the future just not yet

Oh...that would have been helpful to know...lol. Does the T-I AIS fit in the T-II TB? If so, swap. If not, you could turn up the base idlefor now until you get it all switched over. That way it will not stall coming to a stop.
87CSX603
09-11-2010, 11:57 PM
AIS is completely different size TPS looks like it might work though
R/T
09-12-2010, 09:33 AM
Match the wire colors..... Splice them togeather.
GLHNSLHT2
09-12-2010, 10:53 AM
Need to at least do the computer and wiring. You don't have to add an i/c right away. Sorry but you should have read all the things you needed to do before doing just part of it.
boost geek
09-12-2010, 02:26 PM
If you want to use the stock computer, this will do the trick, 46mm blow through t.b. converted to take the 2 wire IAS. Works good, used it on both my 86 and 87 Shelby Chargers. $40 shipped if you want it.

http://i91.photobucket.com/albums/k302/boostgeek/side-1.jpg

http://i91.photobucket.com/albums/k302/boostgeek/back-1.jpg

http://i91.photobucket.com/albums/k302/boostgeek/IAS3.jpg
zkeifer
09-12-2010, 03:15 PM
Need to at least do the computer and wiring. You don't have to add an i/c right away. Sorry but you should have read all the things you needed to do before doing just part of it.

yea well it was kind of spure of the moment whyll the head is off and we replace the head gasket why not put the manifold on now so we dont have to take the head off again any time soon and my buddy is going to look for his 87 stock LM for me to run till i can get my hands on something better and put the car together better right now just using parts i have sitting around