PDA

View Full Version : GRP rods on a 2.5 common block?



John B
06-19-2006, 02:33 PM
Do the GRP aluminum rods fit a 2.5 CB without notching the bottom of the cylinders?

mock_glh
06-19-2006, 03:21 PM
No way,dude! Get your die grinder out. You'll also find that unless you want to narrow the big end down some, you'll need to go .040 over on the cylinders.:nod:

John B
06-22-2006, 11:55 AM
Thanks for the info! That saved me a lot of grief!:o