PDA

View Full Version : 87 omni



thedon809
07-14-2010, 09:08 PM
I'm done with my 86 daytona. The rust is just too bad and it's been in a few accidents in it's life. My plans are to transplant my powertrain into the omni when I pick it up.
Here is a breakdown of the setup i'm going to do.
86 2.2 block
.020" over wiseco pistons
t2 rods
heavily ported, big valve swirl head
some kind of big cam
holset hy35
big ole intercooler
big plenum intake
built automatic with RMVB and high stall TC.

thedon809
07-14-2010, 09:12 PM
Teardown of the daytona. The engine already has the wisecos and t2 rods in it. It did burn a little oil after I rebuilt it, I think it was because the guides weren't exactly in spec.
http://i272.photobucket.com/albums/jj197/thedon809/daytona/0301101538-00.jpg
In 45 minutes, it looked like this
http://i272.photobucket.com/albums/jj197/thedon809/omni/68baaab9.jpg
http://i272.photobucket.com/albums/jj197/thedon809/omni/126ee5e8.jpg
http://i272.photobucket.com/albums/jj197/thedon809/omni/b57bae2f.jpg
http://i272.photobucket.com/albums/jj197/thedon809/omni/f57c8a97.jpg
http://i272.photobucket.com/albums/jj197/thedon809/omni/528864b4.jpg

thedon809
07-15-2010, 10:27 PM
Finished taking the engine/trans out.
http://i272.photobucket.com/albums/jj197/thedon809/omni/54a0e310.jpg
http://i272.photobucket.com/albums/jj197/thedon809/omni/786a933e.jpg
I guess this will make it knock.
http://i272.photobucket.com/albums/jj197/thedon809/omni/1e98959e.jpg

thedon809
07-17-2010, 05:12 PM
I tore the tranny down because the 2-3 shift was flaring, and my friend drove it when it was way low on fluid and it wouldn't shift out of first.
http://i272.photobucket.com/albums/jj197/thedon809/534798a9.jpg
looks like the coating wore off the kolene steels.
http://i272.photobucket.com/albums/jj197/thedon809/5176c62a.jpg
http://i272.photobucket.com/albums/jj197/thedon809/52b9da8e.jpg
http://i272.photobucket.com/albums/jj197/thedon809/3c5ba393.jpg
http://i272.photobucket.com/albums/jj197/thedon809/f86fac47.jpg
http://i272.photobucket.com/albums/jj197/thedon809/06ce4180.jpg
http://i272.photobucket.com/albums/jj197/thedon809/79e89f4a.jpg

thedon809
07-19-2010, 08:35 PM
It ain't an hy35, but it's close enough and free.
http://i272.photobucket.com/albums/jj197/thedon809/omni/02ec3827.jpg

turbokid
07-20-2010, 12:58 AM
Holy hell thats gonna be one bad --- set up

thedon809
08-22-2010, 08:38 PM
The omni has landed
http://i272.photobucket.com/albums/jj197/thedon809/omni/608c1447.jpg

thedon809
08-23-2010, 10:47 PM
Aside from a little surface rust on the passenger side, the floors are perfect. The carpet was nasty, damn roaches in it the size of a small dog.
http://i272.photobucket.com/albums/jj197/thedon809/omni/de43d6a6.jpg
http://i272.photobucket.com/albums/jj197/thedon809/omni/dbd55290.jpg

thedon809
08-24-2010, 09:14 PM
Tore out the dash and all the sound deadening crap. I'm going to sand all the surface rust, prime it, and paint the whole floor with undercoating. I sat in some srt4 seats for the first time. I WILL be getting some for the omni haha. I'm not gonna lie, it looks like a drunken retard welded this car together.
http://i272.photobucket.com/albums/jj197/thedon809/omni/24abdbf0.jpg
http://i272.photobucket.com/albums/jj197/thedon809/omni/66bfda19.jpg