View Full Version : 86 Reliant Turbo harness
1985ShlbyChrger
06-14-2006, 12:36 AM
I just acquired an 86 Reliant wagon 2.5 TBI car. I am yanking the tall block 2.5 and replacing it with a 2.2. I am converting it to Turbo II status. A wiring harness would be greatly appreciated. It needs to be an 87 TI harness for me to start with. I don't know which bodies have a compatible wiring harness. Let me know what you have. Thanks
Nate
89acclaim
06-14-2006, 12:48 AM
If you want I have a 87 harness from a Lebaron 4door (lancer) that you can have, someone did mess with it some. If not I know the Carlisle yard has a 88 lebaron and K car turbo. There is a 86/87 T1 shadow convert in there also and a 89 turbo van. If you want I can drop off my harness/computers tomorrow.
Daniel Merrill
89acclaim
06-14-2006, 01:05 AM
Just checked some one cut the alternator wires and I believe 3 others then taped them back together. I got the car as not running with a blown head gasket.
Daniel Merrill
1985ShlbyChrger
06-16-2006, 02:40 PM
Bring it over and we'll look at it. Are you busy tonight?
89acclaim
06-16-2006, 05:47 PM
I am going to be snagging some early sleep. I am going to get a car early tomorrow. Pm me directions to your place, I have tomorrow evening free, how is that for you?
Daniel Merrill
85shelbycharger
06-16-2006, 09:21 PM
Nate, if this doesn't work out for you, I'll go get the one out of the junkyard that I was telling you about.
1985ShlbyChrger
06-20-2006, 01:01 PM
Thanks Pat, but Daniel hooked me up. The Turbo Reliant project will be proceeding shortly. Thanks Daniel!
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.