View Full Version : oxygen sensor thread size?
guyd_15
04-30-2010, 05:29 PM
Just pulled the old one and wanted to tap the hole, to make sure the threads are ok.
18mm x 1.5 I think.
Anyone know for certain?
Thanks,
Guy
Speedeuphoria
04-30-2010, 06:06 PM
pretty sure thats it
TopDollar69
04-30-2010, 06:30 PM
Get a spark plug thread chasing tool, it's the cheapest way to go and very easy to find at most auto parts store.
turbovanmanČ
04-30-2010, 07:25 PM
Yep, 18x1.5.
RoadWarrior222
04-30-2010, 08:55 PM
Yeah, ask for a M18x1.5 tap and it's $10, ask for a Spark Plug tap and it's $20, ask for an O2 Sensor tap, and it's $30....
... and the devious countertroll will ask you what it's for, say M18x1.5 holes, or you'll end up with the $30 one :D
guyd_15
05-01-2010, 09:30 AM
Thanks again fellas.
Guy
TopDollar69
05-01-2010, 10:50 AM
I couldn't find a tap that size in town, but they had lots of spark plug thread chasing tools.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.