GLHSStatus
04-15-2010, 11:13 AM
have an 89 turbo van harness that we are swapping the pins to go into an 87 GLHS bulkhead on the engine side. there is a few pins that are either missing or we dont know what we should use. for the 89 van pins will we need to use pin #41 60-way brake sense?
for the 87 GLHS bulkhead what wire will we need to use from the van for pin #6 splice-charging circuit, alternator?
another one we cannot figure out, is on the 87 there is two pin locations for the brake switch which is pin location #11 with an 18 Guage wire thats white with tan and pin location #29 which is 20 guage and is black. but on the 89 harness it only has a 20 guage black on pin location #34. my guess is we use the wire that is in pin location 34 on the van and insert it into pin location 29 on the 87 harness. but which goes into pin location 11 on the 87?
for the 87 GLHS bulkhead what wire will we need to use from the van for pin #6 splice-charging circuit, alternator?
another one we cannot figure out, is on the 87 there is two pin locations for the brake switch which is pin location #11 with an 18 Guage wire thats white with tan and pin location #29 which is 20 guage and is black. but on the 89 harness it only has a 20 guage black on pin location #34. my guess is we use the wire that is in pin location 34 on the van and insert it into pin location 29 on the 87 harness. but which goes into pin location 11 on the 87?