PDA

View Full Version : General: Parting white 91 Spirit R/T


lengel
04-08-2010, 12:50 PM
I am keeping the front seats, flywheel, A/C braket, bottom end, and strut tower brace everything else is up for grabs.
All prices are + shipping

cam & crank sensor SOLD
ecu SOLD
injestors $30
acufab AFPR SOLD
Exhaust 2.5" DP & 3" from DP to the bumper with 3" magnaflow muffler SOLD
turbo SOLD
powder coated valve covers and intake manifold(ported for a 58mm TB) SOLD
powdercoated/rebuilt/ported 58mm TB (comes with ais, tps, cable bracket) $140
all 4 timing belt sprokets $125
low mile timing belt tensioner & idler SOLD
Greddy FMIC (Has some dents but work fine), piping, silicone couplers,T bolt clamps, & turbo XS bov SOLD
Trans SOLD
Cams SOLD
rocker shafts, hardware,lifters, & arm SOLD
TI valve retainers SOLD
Exhaust manifold (drilled and taped for egt prob) $50
waterbox and thermo neck $35
head (NO cams rockers or retainers) SOLD
Gauge pod powder coated black With AEM wideband, autometer EGT, and oil pressure $300
autometer boost gauge and pod SOLD
Arp head studs SOLD
powdercoated fuel rail SOLD
Coil $30
Mangnacore wires SOLD
Timing belt covers $40
Shifter cables $50
Gauge cluster $30
shiter $25
power steering pump $35
serpentine tensioner $35
water pump, housing, pulley $25
cometic head gasket SOLD
Fwd oil feed line SOLD
low miles A/C compressor SOLD
low miles A/C condensor $50
Fwd valley cover SOLD
Catch can SOLD
Alternator $20
I will be adding more.

Thanks Adam

http://i379.photobucket.com/albums/oo237/bethany017/Picture1497.jpg
http://i379.photobucket.com/albums/oo237/bethany017/Picture1498.jpg
http://i379.photobucket.com/albums/oo237/bethany017/Picture1499.jpg
http://i379.photobucket.com/albums/oo237/bethany017/Picture1500.jpg
http://i379.photobucket.com/albums/oo237/bethany017/Picture1501.jpg
http://i379.photobucket.com/albums/oo237/bethany017/Picture1502.jpg
http://i379.photobucket.com/albums/oo237/bethany017/Picture1503.jpg
http://i379.photobucket.com/albums/oo237/bethany017/Picture1504.jpg
http://i379.photobucket.com/albums/oo237/bethany017/Picture1505.jpg
domni058
04-08-2010, 01:56 PM
Hi, i bought a 58mm throttle body from you and it is great, i'm interested in the some of the parts. arp head studs for $50.00 are these for a tlll engine,the fuel rail for $50.00, the low mile belt tensioner and idler for $40.00 how low is low! for milage on them, the manga core wires for $30.00 and i might wont the valve cover and intake, i'm looking for a silver color not the red! let me know what color they are! and can i send a postal money order if thats ok! i sent one for the throttle body, thanks Doug.
iTurbo
04-08-2010, 02:09 PM
Hi Adam, I'm interested in the ECU. Also looking for a TIII brake booster vacuum hose/tube, a PCV breather box (w/metal bracket), and a set of those shields that go between the block and bellhousing.
lengel
04-08-2010, 06:20 PM
Hi, i bought a 58mm throttle body from you and it is great, i'm interested in the some of the parts. arp head studs for $50.00 are these for a tlll engine,the fuel rail for $50.00, the low mile belt tensioner and idler for $40.00 how low is low! for milage on them, the manga core wires for $30.00 and i might wont the valve cover and intake, i'm looking for a silver color not the red! let me know what color they are! and can i send a postal money order if thats ok! i sent one for the throttle body, thanks Doug.

I posted some pictures, so you can see the valve covers. Head studs are for a TIII. Low miles on the tensioner and idler are under 1000.



Hi Adam, I'm interested in the ECU. Also looking for a TIII brake booster vacuum hose/tube, a PCV breather box (w/metal bracket), and a set of those shields that go between the block and bellhousing.

PM sent
Simsy
04-08-2010, 06:57 PM
great prices!! :thumb:
domni058
04-08-2010, 07:16 PM
i want all theparts i listed plus the valve covers and the intake, let me know how much + shipp and i can send out the postal money order on sat, if that is ok, thanks Doug.
domni058
04-08-2010, 07:18 PM
i'm also in need of a dipstick and tube! let me know, thanks again Doug.
glhs727
04-08-2010, 08:13 PM
Did I miss something? why are you parting it out. All the pictures show a pretty nice car....is the whole car for sale?
later,
Cindy
turbovanmanČ
04-08-2010, 08:17 PM
What are "injestors"? :eyebrows:

Interested in the turbo outlet elbow and prop valve. Shipping to 98230. Thanks.
tsiconquest88
04-08-2010, 08:28 PM
pm'd ya on that tbelt tensioner, get back to me on it ASAP thanks man. I didnt know you could get a new t3 tbelt tensioner? besides the cnc one cindy has?
turbovanmanČ
04-08-2010, 08:31 PM
pm'd ya on that tbelt tensioner, get back to me on it ASAP thanks man. I didnt know you could get a new t3 tbelt tensioner? besides the cnc one cindy has?

Maybe he had one sitting around, ;)
tsiconquest88
04-08-2010, 08:41 PM
chyea apparently lol
lengel
04-08-2010, 08:41 PM
What are "injestors"? :eyebrows:

Interested in the turbo outlet elbow and prop valve. Shipping to 98230. Thanks.

Injectors are low mile stockers. $35 shipped for the elbow & prop valve


pm'd ya on that tbelt tensioner, get back to me on it ASAP thanks man. I didnt know you could get a new t3 tbelt tensioner? besides the cnc one cindy has?

You cant it was a NOS one I had. Yeah those FWD rebuildable tensioners are very nice.;)
glhs727
04-08-2010, 11:04 PM
Yeah those FWD rebuildable tensioners are very nice.;)

Yes, they are! Adam does some great work.... and we are proud to sell his products!
later,
Cindy
Simsy
04-08-2010, 11:19 PM
Did I miss something? why are you parting it out. All the pictures show a pretty nice car....is the whole car for sale?
later,
Cindy

Are you looking for another spirit R/T?
glhs727
04-09-2010, 12:24 AM
I'm always looking for the "right" car.
It's just the few pictures shown makes the car look pretty decent, at least the engine compartment, so just wondering what is wrong with the car that would make you take it apart and sell pieces.....
turbovanmanČ
04-09-2010, 01:41 AM
Injectors are low mile stockers. $35 shipped for the elbow & prop valve


It was a joke on the injectors, you had it spelled wrong, ;)

Paypal me your info, thanks. :thumb:
3B3XA66A
04-09-2010, 11:25 AM
pmed on the cluster and some other parts.
domni058
04-10-2010, 01:34 PM
Hi Adam, i sent the check out this morning around 10:00 am, you should have it in a few days, thanks Doug.
Mario
04-10-2010, 03:29 PM
Can you update what is still available?
lengel
04-11-2010, 01:51 PM
Updated the list. If there is something you guys want that is not on the list just ask, because I just didnt get a chance to post everything yet.
Adam
lengel
04-11-2010, 08:58 PM
Some more pics

http://i379.photobucket.com/albums/oo237/bethany017/Picture1506-1.jpg
http://i379.photobucket.com/albums/oo237/bethany017/Picture1508.jpg
http://i379.photobucket.com/albums/oo237/bethany017/Picture1509.jpg
http://i379.photobucket.com/albums/oo237/bethany017/Picture1510.jpg
http://i379.photobucket.com/albums/oo237/bethany017/Picture1511.jpg
http://i379.photobucket.com/albums/oo237/bethany017/Picture1512.jpg
tazaroo
04-12-2010, 08:29 PM
pm sent
Dr.Evil
04-13-2010, 09:04 PM
Interested in:

acufab AFPR $80
Trans $300
TI valve retainers $200
Catch can $30

PM on its way.
Simsy
04-13-2010, 09:20 PM
Pm Sent
lengel
04-18-2010, 05:00 PM
If you dont see something on the list, just ask I may have it.