Parting out: '87 CSX

[85shelbycharger]

Junking an '87 CSX. All Shelby specific parts are gone. Won't be around for long. Post up if there's something you need and I'll pull it off (no reasonable offer refused). Otherwise it's heading to the crusher within a couple of days!

[iTurbo]

How about the rear bumper cover? I really only need the black main cover, not the silver shelby specific piece that goes over it.

[83Shelby]

How about the boost gauge??

[DC Turismo]

How about the rear bumper cover? I really only need the black main cover, not the silver shelby specific piece that goes over it.

There was no rear bumper on the car. Sorry man.

[DC Turismo]

How about the boost gauge??

Sending you a PM.

[iTurbo]

Bummer, thanks for letting me know.

What about the plastic trim on the interior door panel? Mine have tabs broken off and are very loose.

[junior92]

what about the door gx

[DC Turismo]

The strip at the bottom lip of the door or the rocker panel pieces? The car came with both of the lower door pieces but only the passenger side rocker ground effect piece.

[DC Turismo]

Bummer, thanks for letting me know.

What about the plastic trim on the interior door panel? Mine have tabs broken off and are very loose.

$10 plus S&H? They're perfect with no tabs broken, I took them off tonight.

[85shelbycharger]

Not seen in pics, but we also have the front bumper w/airdam. Here's some pics of this gem:

[iTurbo]

$10 plus S&H? They're perfect with no tabs broken, I took them off tonight.

Cool, I will most definitely take them. I'm going to go out to the garage and see if I need anything else for my CSX. Will be sending you PM tonight or tomorrow.

[DC Turismo]

Sounds good , let me know.

[phase827]

still have the ground effect parts? someone else asked about them still for sale?

[DC Turismo]

We have the front airdam attached to the bumper cover, both bottom door clad pieces, and the passenger side rocker piece. The other pieces were MIA when we picked the car up and the previous owner had no idea where they were (he may still have them but isn't sure... I'm not counting on him tracking them down.)

[BadAssPerformance]

Ouch, that was in rough shape? Hows the floor? other sheetmetal? I have a couple in need of patch panels. Any of the interior peices liek sun visors nor FUBAR?

Also, FYI, not CSX specific, but '87 Shadow specific parts if not too messed up:
-hood latch lever/cable (actually the whole bottom half of the dash is slightly different from 88)
-front seat tracks
-radiator overflow bottle & cap
-base model small center console
-base model (non-bin) center dash support brackets

Also, what number? Any more pics?

[135sohc]

Both taillights ?

[jl93sundance]

Both taillights ?

One had a small crack iirc.

[DC Turismo]

Jim's correct, the driver side is cracked.

[raccoon]

hey did only the CSX get the wing in 87? ive never seen a 87ES with a wing. not even in the dealership papers. that would make it a Shelby part ?

[BadAssPerformance]

hey did only the CSX get the wing in 87? ive never seen a 87ES with a wing. not even in the dealership papers. that would make it a Shelby part ?

Correct, no wing on '87 except CSX, but the same wing was used on any '88+ ES.

[rosie]

PM going to be sent ;)

[DC Turismo]

Thanks for the heads up on the 87 specific pieces JT. I'll see if any are salvageable.

The interior is junk. The plastic pieces are brittle just like SC panels usually get. Reason being was that the driver's window was down on the car since 97 so mother nature took her course.

Sheetmetal is all bad, not a single undented/nonrusted piece on the car.

It was #515 as I posted in the Shelby Registry sticky.


Ouch, that was in rough shape? Hows the floor? other sheetmetal? I have a couple in need of patch panels. Any of the interior peices liek sun visors nor FUBAR?

Also, FYI, not CSX specific, but '87 Shadow specific parts if not too messed up:
-hood latch lever/cable (actually the whole bottom half of the dash is slightly different from 88)
-front seat tracks
-radiator overflow bottle & cap
-base model small center console
-base model (non-bin) center dash support brackets

Also, what number? Any more pics?

[BadAssPerformance]

Cool, let us know one of us might need somethind?

Ouch that sucks :( Hate to see them die that way! Heck, hate to see them die! :(

[85shelbycharger]

I'll post up what we keep off of it.
We're used to seeing them die... it's better this way compared to seeing them rot in a field like this one had been. Otherwise, useful parts might go to waste.

Couple things from tonight:
I think we're going to keep the rear seat as it is just dirty and is not ripped. Didn't remove it yet to get pics since it got dark on us, but we figure in the worst case perhaps someone may like to buy it to use the fabric or the entire seat as a whole? Also, the passenger door panel isn't bad either upon further examination. We'll get pics up of those tomorrow for those interested.

[vnt-254]

looking for some troublesome parts to remove.Are the the door glass, window rubbers, belt moldings(window scrapers),and antennabase and cable,in decent enough shape that it could be removed and put back?Looking for these parts.thanks

[iTurbo]

PM sent.

[TopDollar69]

Any chance you could pull the front coil springs? How much would you have to have for them if you can pull them?

[iTurbo]

Hey Billy I sent you a PM with pics on the interior parts I'm looking for. But would you be willing to ship a rear axle (totally stripped down)? I'm having a hell of a time finding a good original one for my car.

[jl93sundance]

But would you be willing to ship a rear axle (totally stripped down)? I'm having a hell of a time finding a good original one for my car.

Car is gone, axle went with the car.