Need help reassmbling valvebody- lockup 413

[86Shelby]

While all the valves and springs were out my torx socket slipped while seperating the valve body halves and I managed to scatter the valves & springs on my workbench. I can figure out where a few valves go, but most I cannot. My 91 FSM only shows the valve arrangement for non-lockup 413's while I'm working with a lockup 413, many of my valves look much different. I also have no idea which springs go where. Any pictures or anything that can help me get this mess straightened out would be appreciated. The trans is a 91 turbo lockup A413. Thank you.

[turbovanman²]

Do you have the ATSG manual?

Check this link, and also check the DDG, it has a pic of the valve body.

http://www.turbo-mopar.com/forums/showthread.php?t=3180

[iceman.kcmo]

ATSG Manual. I just looked at it today

http://oskin.ru/pub/chrysler-dodge/manuals/ATSG_Transmission_Repair/ATGS_Torqueflight_A404_A413_A415_A470.pdf

[86Shelby]

Thank you for the links and all. Got it figured out and everything works fine.