Mahle Piston availability

[glhs727]

We have in stock NEW mahle 2.2 t-2 pistons STD. size only and Mahle 2.5 .040 oversize ONLY. All other sizes are discontinued and depleted. Once these sizes are depleted, no more 2.2/2.5 mahles.

Listed on our site for $139 a set, and if you order a set of rings at the same time, get the rings for $69 (reg. price $80 per set).
Thanks,
Cindy

[roachjuice]

got my 2.5 pistons yesterday! thanks again cindy!!!:thumb: will be ordering some rings soon.

[4 l-bodies]

Cindy,
Have you measured the std. size pistons or is their a actual size listed on the box? If so, what are the actual dimensions. Sort of confused as Mopar had A-D sized Mahle all referred to as standard bore.
Thanks,
Todd

[mock_glh]

I once bought a set of standard 2.2 pistons from Mahle (through a dealer) that were "E" size. I've never seen a production engine with those. They actually required a slight cleanup hone to fit properly.

[4 l-bodies]

I once bought a set of standard 2.2 pistons from Mahle (through a dealer) that were "E" size. I've never seen a production engine with those. They actually required a slight cleanup hone to fit properly.
Yeah sort of thought they might be the "E" or largest std. size. How many standard bore blocks are out there that could be cleaned up that are still round and without taper in the walls? Guess that's why they are still available:nod:
Todd

[glhs727]

for all you inquiring minds....
The std 2.2 mahles available are all stamped with the size 87.474mm
and all measure 87.474 mm. there are no a, b c etc....on these replacements
Later,
Cindy

[Reeves]

Could you post the piston size or recommended bore size for the 2.5L .040" Mahle Pistons? I have a .040" block sitting here and would like to get some pistons for it and put it in the PLH Van.