PDA

View Full Version : outer drivers cv boot



mark
05-31-2006, 04:49 PM
my outer drivers vc boot split the other day and I thought i got the right split boot kit but its not. does anyone have a definitive answer. I already cut the old boot off so I cant really drive the car. It was not contaminated with anything, so the joint itself is fine.

I dont want to replace the whole axle, but if thats the only solution I guess thats my road.

so basically... i need a 2 piece split boot for the t3 axle. if there is one.

turbovanmanČ
05-31-2006, 04:52 PM
Just go to the parts store and buy a new boot kit. Remove the axle, knock off the outer cv joint, install boot kit, new grease and your done.

mark
05-31-2006, 04:54 PM
i guess i should do it the right way...

thanks for the eye opener...

looneytuner
05-31-2006, 06:07 PM
yep and clean the grove for the clamp VERY well.

mark
05-31-2006, 06:13 PM
ugh, went to autozone and got a part number fenco K2263 but the computer said that they cant get the part... ughhhhhh. help