iTurbo
02-14-2010, 01:26 PM
Looking for a few misc TIII parts. I took some pictures to help identify them as most are TIII specific. I'll add to this thread as I find more things I need.
1. TIII air box bracket. This is the bracket that bolts to the firewall side of the cylinder head and has two studs to attach the airbox assembly.
http://www.turbosedan.com/t3stuff/DSC04411.JPG
2. TIII separator box bracket. This is the little metal bracket that attaches to the separator box so that it can be bolted to the intake manifold.
http://www.turbosedan.com/t3stuff/DSC04412.JPG
3. TIII throttle body cable bracket.
http://www.turbosedan.com/t3stuff/DSC04413.JPG
4. TIII turbo inlet hose.
http://www.turbosedan.com/t3stuff/DSC04414.JPG
5. Oil pan for common block *without* balance shafts.
http://www.turbosedan.com/t3stuff/DSC04415.JPG
http://www.turbosedan.com/t3stuff/DSC04416.JPG
6. 8v common block water pump pulley. I need the '90+ version with the bigger bolt pattern on the hub. It's just like the TIII pulley but narrower. I found out my '89 pulley won't work because it has the smaller hub bolt pattern. Don't have a pic of this but you probably don't need one anyway.
1. TIII air box bracket. This is the bracket that bolts to the firewall side of the cylinder head and has two studs to attach the airbox assembly.
http://www.turbosedan.com/t3stuff/DSC04411.JPG
2. TIII separator box bracket. This is the little metal bracket that attaches to the separator box so that it can be bolted to the intake manifold.
http://www.turbosedan.com/t3stuff/DSC04412.JPG
3. TIII throttle body cable bracket.
http://www.turbosedan.com/t3stuff/DSC04413.JPG
4. TIII turbo inlet hose.
http://www.turbosedan.com/t3stuff/DSC04414.JPG
5. Oil pan for common block *without* balance shafts.
http://www.turbosedan.com/t3stuff/DSC04415.JPG
http://www.turbosedan.com/t3stuff/DSC04416.JPG
6. 8v common block water pump pulley. I need the '90+ version with the bigger bolt pattern on the hub. It's just like the TIII pulley but narrower. I found out my '89 pulley won't work because it has the smaller hub bolt pattern. Don't have a pic of this but you probably don't need one anyway.