25 dollar cals....

[DodgeZ]

That's right folks.... that is right. 25 dollars for a custom cal! I know I know. You are saying HOW can I do this so cheap. It is quite simple really, there are a bunch of guys on this site that make it possible for you build your own cals. I am using that advance technology to build YOU a custom cal. These advanced calibrations offer technology not offer by that "other" vendor that has been offer cals from 90's hack tuning. Do you want to know if you are getting knock by a flash of your dash light? Do you want a staged rev limiter for launching? How about anti-lag? I am the only vendor that can offer these services. :thumb:

Some of you may want to know if I offer "stages". The answer is no. Stages are dumb. I offer a tunes based on what you want, not some fake "stage" that has no real backing behind it...

Shoot me a PM for details. :thumb:

[ShelGame]

Do you want to know if you are getting knock by a flash of your dash light? Do you want a staged rev limiter for launching? How about anti-lag? I am the only vendor that can offer these services. :thumb:


Well, not the ONLY vendor... wink, wink...

[butchsuppe]

Ahhhh, vendor wars grab the popcorn. :D

[tsiconquest88]

well no offense to u dodgez I used shelgame and i will stick with him. No sense in changing. Its odd to even see this sense he has been doing it lol. its like when grocery stores had wal mart come around. Well minus the big business aspect haha.

[cordes]

I'm actually offering the same services for $24.99, but only while supplies last.

[turbovanman²]

I'm actually offering the same services for $24.99, but only while supplies last.

$23.99, :eyebrows:

[cordes]

$23.99, :eyebrows:

New lower price of 23.98 SHIPPED!

[tsiconquest88]

fine i will do them for 22.99 lol cant guarantee ---- though hahahahahaha

May run... may not... take your chances like ebay!!!

[cordes]

fine i will do them for 22.99 lol cant guarantee ---- though hahahahahaha

I guarantee that the car will run with the cal or your money back.

[tsiconquest88]

good man!!! oh wait guys shelgame even hooked me up with a second chip after the first cal was too much for my van----- FREE!!!! and i got to keep the other chip!!! guys gotta up the show here hahahaha;)

[ShelGame]

Business has been a little slow for me. I think I'm gonna start paying YOU to take my cals. Of course, these will be surplus cals based on the older bug ridden T-SMEC v15...

[tsiconquest88]

well if its been slow for you, then im sure it will be slow for anyone. idk why more people dont have the cals done by you guys?

[Aries_Turbo]

Business has been a little slow for me. I think I'm gonna start paying YOU to take my cals. Of course, these will be surplus cals based on the older bug ridden T-SMEC v15...

that 30% fuel increase is a FEATURE! it allows 30% more boost! :)

brian

[tsiconquest88]

shel are u saying my cal is bug ridden haha?

[bakes]

Do i get a free set of steak knifes???? if i call in the next 10mins

[cordes]

that 30% fuel increase is a FEATURE! it allows 30% more boost! :)

brian

My cals come with 78% more fun though.


ETA: Dyno proven fun from my on site dyno.

[tsiconquest88]

u have a dyno?

[Mopar318]

Business has been a little slow for me. I think I'm gonna start paying YOU to take my cals. Of course, these will be surplus cals based on the older bug ridden T-SMEC v15...

Slow? I have been trying to buy a new cal from you for a few months now.:D

[cordes]

u have a dyno?

Who doesn't?

[Aries_Turbo]

u have a dyno?

hell yes! made from 55 gal drums filled with cement and a semi truck axle.

brian

[T-Bohn]

hell yes! made from 55 gal drums filled with cement


don't ask questions you don't want the answers too...


he just didn't tell you it's at the bottom of the river

[Murphy]

i'm almost surprised someone doesn't offer a like stage 3 kit...3 bar map, +40 injectors, and a cal with the only things done are scale the map and injectors, maybe mess with the timing a bit, no speed limiter, higher rev limiter. Only option would be 2.2 or 2.5. Have it built for a t2 car, and a little rich so its good for a few bolt ons

[turbodaytona87]

Had mine done by shelgame, works well and would definitely recommend him to anyone. :thumb:

[DodgeZ]

well no offense to u dodgez I used shelgame and i will stick with him. No sense in changing. Its odd to even see this sense he has been doing it lol. its like when grocery stores had wal mart come around. Well minus the big business aspect haha.


Had mine done by shelgame, works well and would definitely recommend him to anyone. :thumb:

thanks for sharing guys....

[turbodaytona87]

Well you did claim you were the only one that offered certain features when that isn't true...

[turbovanman²]

i'm almost surprised someone doesn't offer a like stage 3 kit...3 bar map, +40 injectors, and a cal with the only things done are scale the map and injectors, maybe mess with the timing a bit, no speed limiter, higher rev limiter. Only option would be 2.2 or 2.5. Have it built for a t2 car, and a little rich so its good for a few bolt ons

Rob does, its called tell him you want a basic cal, :eyebrows:

Or do it yourself and download the cal but tweak want you want. Trouble is, when you turn the power up and add larger injectors, you have to change fueling, spark etc.

[ShelGame]

shel are u saying my cal is bug ridden haha?

LOL, probably... Depends on what I based it on. Lately, I've gone back to using my old stock-based cals due to the misfire thing. Now that that's fixed...

[ShelGame]

Slow? I have been trying to buy a new cal from you for a few months now.:D

You have? You're not on my list...

[Rod Enis]

well if its been slow for you, then im sure it will be slow for anyone. idk why more people dont have the cals done by you guys?

I didn't know they did cals. BUT I DO NOW!!:thumb:

[Mopar318]

You have? You're not on my list...

Check your PM's again. You even responded to me and we had a few messages back/forth.

[ShelGame]

Check your PM's again. You even responded to me and we had a few messages back/forth.

Must've been a while back. I don't have those PM's anymore. Just the one from a couple weeks ago... PM me again with what all you want to do and I'll add you to my to-do list.

[Mopar318]

Must've been a while back. I don't have those PM's anymore. Just the one from a couple weeks ago... PM me again with what all you want to do and I'll add you to my to-do list.

I just fwd the 5 or so PM we had with each other a few months ago.

[turbodaytona87]

I've gone back to using my old stock-based cals due to the misfire thing.

What misfire thing?

[DodgeZ]

I just fwd the 5 or so PM we had with each other a few months ago.

Hey... get a room

[Mopar318]

Hey... get a room
Dont be jealous.:eyebrows:

[minigts]

So do I owe you for the cal you did for my car Kevin, or is me letting you use my house for storage and other features a good barter? :)

[DodgeZ]

So do I owe you for the cal you did for my car Kevin, or is me letting you use my house for storage and other features a good barter? :)

The question is... does it run better then that custom cal you got from the "other" vendor.

[Aries_Turbo]

The question is... does it run better then that custom cal you got from the "other" vendor.

it starts when warmed up doesnt it?

[minigts]

The question is... does it run better then that custom cal you got from the "other" vendor.


it starts when warmed up doesnt it?

DAMN!! Yes it does and yes it does. :)

[BadAssPerformance]

So do I owe you for the cal you did for my car Kevin, or is me letting you use my house for storage and other features a good barter? :)

How much stuff can I store at your house for $25? :eyebrows:

[minigts]

How much stuff can I store at your house for $25? :eyebrows:

LOL Man, I will actually have some room here shortly. Getting this ghetto truck out of my house will free up some space. You can have a strip along the wall, about 300 cubic feet. :p

[BadAssPerformance]

LOL Man, I will actually have some room here shortly. Getting this ghetto truck out of my house will free up some space. You can have a strip along the wall, about 300 cubic feet. :p

LOL... Sweet

[butchsuppe]

How much stuff can I store at your house for $25? :eyebrows:

Can I store my wife there too for $25 ?

[badandy]

if I get a wife by the time I come see you I'll drop her off (along with the $25 storage fee) when I pick up my seats next month.

[minigts]

Can I store my wife there too for $25 ?

Sure, you can share the 300 cubic feet with JT for $25. He'll still have to pay $25 though. :D


if I get a wife by the time I come see you I'll drop her off (along with the $25 storage fee) when I pick up my seats next month.

Only if she's friggin' hot and then yes you can. I won't even charge you a storage fee.

[badandy]

Sure, you can share the 300 cubic feet with JT for $25. He'll still have to pay $25 though. :D



Only if she's friggin' hot and then yes you can. I won't even charge you a storage fee.

Just because it's you I'll bring a big un and give you $50 :D have fun with that Jon boy :thumb:

[shelbymonster]

dodgez , do you have good cores for socketing and how much for , core + socketing+ cal ?

[T-Bohn]

wife storage??? 25 dollars!!!! No questions asked??

That is a deal.... I'll box her up and bring her over. Don'chu worry 'bout it.

[tsiconquest88]

shelgame, this misfire thing what happens with it exactly? im bringing it up cus honestly i have had a small issue (well is pretty annoying lol) the cal is great and all and brought my rpm's down where they needed to be for my 5 speed swap over using the stock auto cal it had, BUT i am lacking power unlike before, it will start to run hard but as im giving it gas it goes like this, best i can explain lol, starts off quick as im accelerating bogs, goes, bogs, goes etc like such and didnt do that till thie second chip u gave me. I ignored it as soon here im taking the van down for complete overhaul, engine and dtich this a-520 to get what it should have, a 568. If you want to disuss in pm thats fine. By no means am i blaming you or your cal, maybe i had a fault in the soldering of the socket to the board even though i did it very precisely as one could, and it didnt do this with the first chip, the first chip just had me idleing whackier than the auto cal, and cutting out and stuff. I do still cut out at times but yea its just not driving right and figured i would see if this sounds like a cal issue to you? I let it go till i seen the issues your saying are possible lol.

[shelbymonster]

shelgame, this misfire thing what happens with it exactly? im bringing it up cus honestly i have had a small issue (well is pretty annoying lol) the cal is great and all and brought my rpm's down where they needed to be for my 5 speed swap over using the stock auto cal it had, BUT i am lacking power unlike before, it will start to run hard but as im giving it gas it goes like this, best i can explain lol, starts off quick as im accelerating bogs, goes, bogs, goes etc like such and didnt do that till thie second chip u gave me. I ignored it as soon here im taking the van down for complete overhaul, engine and dtich this a-520 to get what it should have, a 568. If you want to disuss in pm thats fine. By no means am i blaming you or your cal, maybe i had a fault in the soldering of the socket to the board even though i did it very precisely as one could, and it didnt do this with the first chip, the first chip just had me idleing whackier than the auto cal, and cutting out and stuff. I do still cut out at times but yea its just not driving right and figured i would see if this sounds like a cal issue to you? I let it go till i seen the issues your saying are possible lol.


i did had that issue , ive regap the plugs at .25 if im remembering good and never miss after that

[t3rse]

Either spark blow out or way rich....

[tsiconquest88]

yea i was thinking maybe spark blowout and im no richer than i was before. BTW guys my cal was stock just boost cutout. He just gave me a 5 speed cal due to my auto trans being swapped for 5 speed and i still used the auto cal till i could find a 5 speed mimi smec, which i never found so i said F it i will get a 5 speed cal with cutout eliminated and a 13 psi preset. I have a manual controller anyway if i want to go higher). Using the auto cal with a 5 speed gives some poor drivability issues, but not lack of power like now. I shouldnt need to re-gap and such. Nothing changed beside the cal. drivability is 200 tiems better than when the auto chip was in there though!!! solved the issues i wanted it to, but added an issue lol. The other chip he sent me was too much than what i wanted but it still drove with no lack of power as i have with this second chip he did for me.

[moparfwdsleeper]

LOL Man, I will actually have some room here shortly. Getting this ghetto truck out of my house will free up some space. You can have a strip along the wall, about 300 cubic feet. :p

i just gagged and bagged her, bill me later:thumb:

[DodgeZ]

dodgez , do you have good cores for socketing and how much for , core + socketing+ cal ?

I don't offer socketing at this time.

[minigts]

I don't offer socketing at this time.

I can partner with you and offer socketing. :D Of course, I will outsource this to Cordes. Socketing is $24.99, I'll get cordes to do it for $14.99 and make $10. :p

[tsiconquest88]

i will do it for you, idk if anyone here does? but its easy. I know of a writeup for it to, if u rather just do it yourself. I had no idea it was so easy till i did mine.

[tsiconquest88]

oops nvm lol, theres the answer to your problem above haha

[DodgeZ]

i will do it for you, idk if anyone here does? but its easy. I know of a writeup for it to, if u rather just do it yourself. I had no idea it was so easy till i did mine.

http://boostedmopar.com/forums/showthread.php?1459-How-To-Desolder-the-chip-on-your-Logic-Module

http://boostedmopar.com/forums/showthread.php?1454-How-To-Socket-a-SMEC-SBEC

[tsiconquest88]

oh i got a writeup from a guy on TD (dont kill me lol). Pretty decent writeup. Didnt know you guys had one over there at BM site.

[DodgeZ]

be sure to add it to the thread over there!

[tsiconquest88]

oh wtf lol, i didnt look at ur link till now and it is una's haha. I didnt mention names so i didnt stir up something is it was possibly a problem or wutnot.

[DodgeZ]

We all know the guy we the messed teeth made the SMEC/SBEC right up. I need to go ahead and make my own.

[tryingbe]

LOL, I like this thread.

Money saved can be used to buy some wideband...

[Force Fed Mopar]

oh i got a writeup from a guy on TD (dont kill me lol). Pretty decent writeup. Didnt know you guys had one over there at BM site.

We have lots of good FAQ's there :thumb:

[tsiconquest88]

good to know lol. I havent logged on over at BM too often. No offense or anything, i just always post here lol.

[moparfwdsleeper]

BMs new look is great! kudo's to you guys:thumb::thumb:

[tsiconquest88]

yea it does look good.

[minigts]

I was a part of the color schema. :D He asked my input as I worked on that dadgum Chevy truck.

[DodgeZ]

lol, yeah the "theme" was done over at MiniGTS crib.

[tsiconquest88]

what is the 2 in the oh, one in the eye thing haha? i been wondering wtf this is for a while lol.

[DodgeZ]

what is the 2 in the oh, one in the eye thing haha? i been wondering wtf this is for a while lol.


NWS

http://www.youtube.com/watch?v=Me17_uzP4Pk

At 1:10

[tsiconquest88]

lol, u dont seem like a dude that likes that music. i heard him say it once, but wtf does it mean lol. and howd u even know of it?

[DodgeZ]

lol, u dont seem like a dude that likes that music. i heard him say it once, but wtf does it mean lol. and howd u even know of it?

It is the shocker.

I listen to whatever. Country, rap, rock, top 40, hardcore.

[sdac guy]

Does anyone else think the guy in the video looks more than a little like Simon? :lol::lol::lol:



Barry

[DodgeZ]

Does anyone else think the guy in the video looks more than a little like Simon? :lol::lol::lol:



Barry

No, he isn't running away from the hot half naked chicks.

[bradp]

No, he isn't running away from the hot half naked chicks.

lol:lol:

[turboaddict]

so what about socketing a sbec? how much for that?

[DodgeZ]

so what about socketing a sbec? how much for that?

Talk to ShelGame about socketing services.

[tsiconquest88]

i'' do it for 12 bucks shipped lol

[badandy]

Does anyone else think the guy in the video looks more than a little like Simon? :lol::lol::lol:



Barry
You mean it's not him?...wait, you are right...the skinny chicks should have gave it away:o

[DodgeZ]

You mean it's not him?...wait, you are right...the skinny chicks should have gave it away:o

oh snap!!!!

[Force Fed Mopar]

I was a part of the color schema. :D He asked my input as I worked on that dadgum Chevy truck.

He definitely needs help when it comes to colors :thumb::D