Really Small *Turbo?* For Sale

[168glhs1986]

http://www.youtube.com/watch?v=PBRZZi1M8fo

pictures seen here http://www.turbokeychains.com/images/kct11rs.jpg

For the real SERIOUS racer, tuner, import, or domestic boost enthusiast! This is THE most intense turbocharger keychain available! The KCT-11RS is a full 3D model cast of high-grade polished metal alloy composed of three primary pieces just like a real turbo (backplate, spinning impeller, and housing).

Q. Is this a real turbocharger?
A. No, it's a keychain.

Q. Does this keychain turbo have moving parts?
A. The older models do not, all current models do. If you have an older KCT-11 here's a writeup on modding it to spin: How-To Modify my KCT-11 to spin

Q. Does this Turbo keychain require lubrication?
A. No.

Q. Can I take apart my turbo keychain?
A. If you'd like, just firmly press on the impeller and the backplate should pop off, it's only held in by a touch of rubber cement type glue. You can then "modify" your impeller and hone out/port your compressor housing with a Dremel to allow greater CFM airflow.

Q. Will this give me more horsepower?
A. Probably not. But you can tell people you have a turbo and technically you wouldn't be lying.

I have several available for immediate shipping. Get them while they last! $15.00 shipped to your door.

[glhs727]

are you serious? I would take one for $15....that's pretty cool...

[turbovanman²]

+2, I want one. :thumb:

["Top Fuel" Bender]

already got mine,
they're pretty trick :thumb:

[boost geek]

OK, I want one...

[turbovanman²]

OK, I want one...

You can send it with mine, :thumb:

[rbryant]

He is spinning it backwards! :)

-Rich

[boost geek]

I'll have to PM him again.

[168glhs1986]

I'll have to PM him again.

All pm's replied. Boost geek, see your second pm for the new lower total!

These things are freakin awesome:thumb:

[turbovanman²]

I didn't get no stinkin PM, :(

[168glhs1986]

I didn't get no stinkin PM, :(

:lol: See Boost Geek for your PM.

[168glhs1986]

already got mine,
they're pretty trick :thumb:

Bruce, bringing yours tomorrow to the meeting!

[turbovanman²]

:lol: See Boost Geek for your PM.

FINE!!!!!!!!!!, :mad: :p

[moparfwdsleeper]

Mike that is bad ---!

[BIG PSI]

I will take TWO of them, please PM me you name, address to send M.O. to.

Thanks
Chuck

[168glhs1986]

Mike that is bad ---!

:partywoot:

[168glhs1986]

I will take TWO of them, please PM me you name, address to send M.O. to.

Thanks
Chuck

Twin Turbo's going to BIG PSI, thanks!

[karlak]

I dont know guys. Looks like it has some shaft play.

[boost geek]

Don't they all? Just run 'em hard. :)

[turbovanman²]

Paid but hold off shipping, going to see if Bakes and Don want one. :thumb:

[1984rampage]

I want one! PM me!

[boost geek]

Simon's and mine are paid for. :)

[BadAssPerformance]

I need a couple of those! PM sent! :)





also, moved to "Group Buys"

[168glhs1986]

I need a couple of those! PM sent! :)

also, moved to "Group Buys"

Thanks JT, your twin turbo setup is coming.

*****UPDATE***** 1/23/10

This exclusive Turbo-Mopar offering has been a smashing success since I listed them yesterday afternoon:clap: The first 20 turbo's have been sold and will be making big boost in no time. Thank you everyone.

Howver, we are still accepting orders/backorders. Once my next shipment clears customs and gets fabricated I'll be ready to fill the orders. My best guess is 2-3 weeks but with customs involved there are no guarantees.

FYI - I haven't received payment for all 20 turbos, so wait list priority does matter. If someone from the initial 20 offering backs out, I'll ship yours immediately. So keep the orders coming!

Thank you and :bump2:

[1984rampage]

Should be sick! Cant wait to get mine lol

[jl93sundance]

Count me in for the next batch:thumb:

[86seeS]

same i want one count me in

[168glhs1986]

Current Backorder list

JL93sundance - 1
86seeS -1

[168glhs1986]

All turbo's paid by paypal are going out today via US Mail First Class. Make sure you have a can of compressed air w/ straw and hold it at about a 45 degree angle to the inlet and listen to it spool! IMHO, best keychain out there.

If you have the time, please leave your comments (good or bad) for others to read.

Thank you.

[turbovanman²]

I am stoked, like a fat kid on a smartie, :thumb:

[168glhs1986]

The first Orders have all been filled and shipped out.

I'll be getting my second shipment any day now. I have 3 backorders to fill so I'll have 17 left.

Who wants one? Hopefully the buyers of the first 20 will comment on their turbo key chains so we can get some feedback going.

[tsiconquest88]

put me down

[midnighttoker]

same here

[168glhs1986]

Current Backorder List:

DO NOT SEND MONEY UNTIL THEY ARE IN STOCK AND READY TO SHIP. Should be 2/1/10, I'll let you know.

Paypal address: michaelwah@verizon.net

JL93sundance - 1
86seeS -1
tsiconquest88 - 1
midnighttoker -1
Omni_840 -1
Turbojerk - 1
Crazy Mark - 1

[tsiconquest88]

werd son's lol. When do u need the money and whats the paypal?

[omni_840]

I'll take one!

[tsiconquest88]

WHAT, that lil f'er makes spool noise too haha.

[turbojerk]

Mike, save one for Kyle. He seen mine and he wants one of his own now...

Thanks
T

[karlak]

Little bugger is better made than I thought it would be. Quality key chain.

[168glhs1986]

Feedback Section:


Little bugger is better made than I thought it would be. Quality key chain.
Thanks Karlak


Got mine yesterday. Thanks!

Your welcome. Did you spool the wheel yet? That's the fun part. Do it from the inlet side and you'll get a nice turbo whine.

[glhs727]

Got mine yesterday. Thanks!

[tsiconquest88]

when are the payments due? whats the paypal address? i asked already cus i dont see any of that info. When are the ones for us going to be ready btw?

[168glhs1986]

when are the payments due? whats the paypal address? i asked already cus i dont see any of that info. When are the ones for us going to be ready btw?

They will probably be here Monday but I don't want to accept payment until they here and verified they working properly. At that time, I'll give you the paypal address.

[tsiconquest88]

ok cool, just wanted to make sure i wasnt missing soemthing, i dont like to be in a group buy and have the GB waiting on me or something for payment i didnt know was due or soemthing.

[168glhs1986]

An update. Don't be fooled by cheap $11.00 imitations on Ebay that don't spin properly. These turbo key chains have been taken apart and put back together with mega spin technology. It's the best spinning turbo key chain on the market.

[86seeS]

i dont buy ebay id much rather stay in the community

[1984rampage]

Got mine today! So cool.. I kind of annoyed some people by blowing on it in class making it spin haha.. Just a question, is the main screw and turbine wheel supposed to be off center?

[tsiconquest88]

in the vid, it looks like the wheel is crooked but levels out when its spinning. take a look at the vid above and see what i mean. So yea its supposed to be that way apparently.

[BadAssPerformance]

Got mine today, cool little turbos! Thanks :thumb:

Just curious, why the comp wheel is off-center?

[BIG PSI]

I received my TWINS today and they look cool...
I have NOT yet pushed the BOOST on them.
They are still at idle until Monday then LOOKOUT, 28 psi is coming !!!!!!!

Thanks
Chuck

[168glhs1986]

I received my TWINS today and they look cool...
I have NOT yet pushed the BOOST on them.
They are still at idle until Monday then LOOKOUT, 28 psi is coming !!!!!!!

Thanks
Chuck

Be Careful chuck. These turbo's have never seen 25+ psi. Report back on Monday, Godspeed.

[Blue Iroc R/T]

I'll take TWO. Let me know when they come it. Thanks.

[168glhs1986]

I'll take TWO. Let me know when they come it. Thanks.

Sweet. I expect them today, I'll keep everyone posted and update the backorder list with paypal or mail check to address.

[168glhs1986]

Current Backorder List:

DO NOT SEND MONEY UNTIL THEY ARE IN STOCK AND READY TO SHIP. Should be 2/1/10, I'll let you know.

Paypal address: michaelwah@verizon.net

JL93sundance - 1PAID, Address verified
86seeS -1
tsiconquest88 - 1 PAID, Address verified
midnighttoker -1
Omni_840 -1
Turbojerk - 1
Crazy Mark - 1
Blue Iroc R/T - 2
1986glh - 2 PAID, Address verified
RX2Mazda - 1 PAID, Addres verified

[168glhs1986]

New Turbo Key Chains are in Stock and ready for shipment.

Please send $15.00 per keychain to michaelwah@verizon.net

If you would like to send a check, please pm me for address.

Thanks.

Mike

[tsiconquest88]

payment sent man. thanks.

[168glhs1986]

payment sent man. thanks.

Got it, thanks twiconquest88 (G.A.C.).

PM me your ship to address.

Mike

[tsiconquest88]

if u seen my initals, u must have seen my whole name which means my address should have been there too lol? usually it is. i will give you both addresse as im not sure how your sending, usps, ups, etc. i am pm'n u the address. thanks man

[rx2mazda]

Got my order in!!! Every turbo guy should have one.

[168glhs1986]

Got my order in!!! Every turbo guy should have one.

Damn, well said Carroll (your spiff check is in the mail):bump2:

[turbovanman²]

These turbo key chains have been taken apart and put back together with mega spin technology. It's the best spinning turbo key chain on the market.

Funny stuff, :thumb:

[168glhs1986]

if u seen my initals, u must have seen my whole name which means my address should have been there too lol? usually it is. i will give you both addresse as im not sure how your sending, usps, ups, etc. i am pm'n u the address. thanks man

When you used the personal/family pay option (no fees) the address doesn't show up. I guess it's a way for paypal to limit those freebie transactions.... so we're now officially friends!:thumb:

[168glhs1986]

Originally Posted by 168glhs1986

These turbo key chains have been taken apart and put back together with mega spin technology. It's the best spinning turbo key chain on the market.


Funny stuff, :thumb:

It is hilarious while at the same time being a true statement. We take our turbo's seriously sir:D

[Juggy]

New Turbo Key Chains are in Stock and ready for shipment.

Please send $15.00 per keychain to michaelwah@verizon.net

If you would like to send a check, please pm me for address.

Thanks.

Mike

how much for shipping to canada?
N9C 2A9

[168glhs1986]

how much for shipping to canada?
N9C 2A9

Shipping to Canada via USPS Priority would be $24.00 for the first and $13.00 for each thereafter. So I'd buy three, charge your friends $20.00 bucks each and get yours for $10.00....just a thought.

[tsiconquest88]

When you used the personal/family pay option (no fees) the address doesn't show up. I guess it's a way for paypal to limit those freebie transactions.... so we're now officially friends!

yea i do that to avoid fees lol. I have been using that method for quite some time. Im sure some time or another paypal is gonna be like ummmmm u dont do that many favors hahaha

Yea man we be friends like whoa, like keychain turbo!!!

[168glhs1986]

yea i do that to avoid fees lol. I have been using that method for quite some time. Im sure some time or another paypal is gonna be like ummmmm u dont do that many favors hahaha

Yea man we be friends like whoa, like keychain turbo!!!

:lol:

[jl93sundance]

Payment Sent as gift:thumb:. My address is in the message

[tsiconquest88]

yea i never noticed it dont show the address. I never had anyone ask for it after sending it this way all this time??? odd lol.

[168glhs1986]

Payment Sent as gift:thumb:. My address is in the message

Thanks got it:thumb: It'll ship tomorrow via USPS First Class. Enjoy.

[midnighttoker]

money sent!!

[168glhs1986]

money sent!!

Got it, thanks midnighttoker. Your Turbo Key Chain goes out tomorrow. Enjoy.

[midnighttoker]

thanks!!! ill let ya know when it gets here

[tsiconquest88]

dont be usin it for midnight toking man :D

[midnighttoker]

LOL,it enhances it :p

[tsiconquest88]

sick spoolup of your high man haha

[midnighttoker]

Lol :D

[168glhs1986]

dont be usin it for midnight toking man :D
How did this thread go from Turbo Key Chains to midnight toking?:lol:

[tsiconquest88]

eh idk, soemthing me and him mess around about from time to time. stems from his username lol.

[168glhs1986]

Current Backorder List:

DO NOT SEND MONEY UNTIL THEY ARE IN STOCK AND READY TO SHIP. Should be 2/1/10, I'll let you know.

Paypal address: michaelwah@verizon.net

JL93sundance - 1PAID and shipped
86seeS -1
tsiconquest88 - 1 PAID and shipped
midnighttoker -1 PAID and shipped
Omni_840 -1 Paid and shipped
Turbojerk - 1
Crazy Mark - 1
Blue Iroc R/T - 2 Paid and shipped
1986glh - 2 Paid and shipped
RX2Mazda - 1 Paid and shipped

Updated list above. Only 7 left and I will be sold on a first come first serve basis.

[omni_840]

Pm replied!

Sorry for the delay:)

[rx2mazda]

Got mine today! Packaging was kind of small but, it was inside. Now I can finally start fabbing my equal length header. Thanks!

[168glhs1986]

Got mine today! Packaging was kind of small but, it was inside. Now I can finally start fabbing my equal length header. Thanks!

Can Big Stuff work with this turbo as well?

[rx2mazda]

Can Big Stuff work with this turbo as well?

:eyebrows:

[jl93sundance]

Got mine today...my only concern is if my motor is going to be able to spool this thing up:p

[tsiconquest88]

got mine today too, pretty cool little guy lol. Surprised at how solid it is. Figured it would be light somewhat cheaper made lol.

[168glhs1986]

got mine today too, pretty cool little guy lol. Surprised at how solid it is. Figured it would be light somewhat cheaper made lol.

That was my initial reaction, they are solid. HOWEVER, be careful with the closures as they are NOT well made. Make sure they both are secure OR change them all together to something more safe.

[tsiconquest88]

i tried rotating the blade assembly to find a straight position lol, 2 ways still allow it to interlock but the assembly is still crooked lol. So i put it how it back how it was haha. IDK it was just bothering me even before i bought it and seen it that way in the video.
As for the closure? not sure what that means lol.

[tsiconquest88]

oh nvm lol u meant the ring on each side, one that holds the large ring and the other that holds the turbo. yea they are pretty bad lol. Didnt notice it till now.

[168glhs1986]

oh nvm lol u meant the ring on each side, one that holds the large ring and the other that holds the turbo. yea they are pretty bad lol. Didnt notice it till now.

Yes, thanks for that clarification.

[tsiconquest88]

nooo thank u lol. Im just the dumbass who didnt realize what you meant. Im sure others will catch on right away haha

[midnighttoker]

got mine today.thanks!!!

[168glhs1986]

got mine today.thanks!!!

:thumb:

[168glhs1986]

Anyone else want one? ttt

[86seeS]

got mine the other day coolest thing ever

[omni_840]

Anyone else want one? ttt

Is this a TM exclusive?

I may be able to get some interest on my local car forum....


BTW I rec'd mine and it's a really nice piece

[Dr.Evil]

I'd like one!! Let me know where to send paypal/$$. sorry if it was somewhere in this thread I didn't read all the way through it.

[168glhs1986]

PM sent.

[tsiconquest88]

still spoolin strong lol....

[86seeS]

hahaha i had to tighten mine back up once but its still rockin also

[tsiconquest88]

really? i took my apart once, I forget why lol, but just used crazy glue to re-install the back plate and its been good to go. Hot glue did not work lol.

[GLHS-024]

Can you still get these?

[RoadWarrior222]

How quick would it spool on a 48cc weed whacker?

[Turboomni]

is it a true Super 60?

[tsiconquest88]

dude this thing is what a super 70 "would" be hahahaha

Run some shop air through it with a blow gun lol.

[Juggy]

can they handle 140 psi?! lol

[tsiconquest88]

beats me- i was sayin to try it lol.

[shackwrrr]

They have a DBB version now

http://www.turbokeychains.com/bb.html

[168glhs1986]

They have a DBB version now

http://www.turbokeychains.com/bb.html

I was going to do a bulk buy again. Any more interest out there?

[glhs727]

I'll take 3!!!

[168glhs1986]

I'll take 3!!!

I'll have to order some and I'll be in touch when they arrive. Thanks.

[TheCanadian007]

Does the $15 include shipping?