View Full Version : WTB - TB w/ AIS and TPS
85_600
12-28-2005, 02:28 AM
For a 1985 T1 Dodge 600 A-413.
OR, just the AIS and TPS together ( they are wired together on my car ).
Either one...willing to work on the price.
Thanks!
Paul
@turboXE85 - If you're here I may be interested in yours, again :o
Jack's Dodge
12-28-2005, 11:49 AM
For a 1985 T1 Dodge 600 A-413.
OR, just the AIS and TPS together ( they are wired together on my car ).
Either one...willing to work on the price.
Thanks!
Paul
@turboXE85 - If you're here I may be interested in yours, again :o
THey should plug into the harness. I can get you two sets for ... $40 shipped
85_600
12-28-2005, 01:31 PM
THey should plug into the harness. I can get you two sets for ... $40 shipped
I probably should have cleared this up earlier - They are separate at the TB but they both go into one plug, then plug into a harness that then goes into a wire loom behind the drivers side strut tower. Why I'd like the TB or the two together is so I can just unplug mine and plug the newer ones right in, without having to splice them.
Also, do yours come from a known "good" idling TD? This Saturday I'm replacing the Speed Distance Sensor to see if this is the correct fix for my "coming to a stop and wanting to stall" problem. The Mini Mopar site has pointed to this as being one of the more common problems.
Jack's Dodge
12-28-2005, 04:08 PM
That is your issue. My Z used to have that problem before I replaced my SDS. I have the log setup on my 86 T1, so if need be, I'll run the AIS/TPS for a few days to make sure it's Kosher. Let me know.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.