PDA

View Full Version : 2.4 swap into '89 Daytona Q



Scottmon
12-04-2009, 04:30 PM
Guys,

I'm thinking about swapping an SRT-4/568 combo into an '89 Shelby Daytona. Since this car has the earlier mounts (pre-'91) I was wondering what PS and front mounts to use? I'm thinking a 2.4 Caravan front mount...passenger side mount I'm at a loss. From what I've read the 568 should be fine with the stock DS mount and bobble shock unless someone know different.

Thanks

Austrian Dodge
12-04-2009, 05:30 PM
2.4 front caravan mount with a little bending and cutting will work!

a little more work involved for the passenger side, but certainly do-able.

http://www.turbo-mopar.com/forums/photopost/data/837/passenger_engine_mount.JPG

turbovanmanČ
12-04-2009, 09:00 PM
Guys,

I'm thinking about swapping an SRT-4/568 combo into an '89 Shelby Daytona. Since this car has the earlier mounts (pre-'91) I was wondering what PS and front mounts to use? I'm thinking a 2.4 Caravan front mount...passenger side mount I'm at a loss. From what I've read the 568 should be fine with the stock DS mount and bobble shock unless someone know different.

Thanks

Not to be picky but its 90 and up the mounts, :thumb: