Ported head pics

[DBB mini]

Spent some time thanksgiving week porting my head. I did the roughing out on the cnc. Blended the rest by hand. I didn't get too wild with it, fear of hitting a water jacket. The runners originally had a .660" pin fit in them. I took material out of the roof so now .720" at the smallest spot. I still have some polishing to do, and these are all exhaust pics, where I spent most of my time.
http://i57.photobucket.com/albums/g222/DBBmini/DSC02683.jpg
http://i57.photobucket.com/albums/g222/DBBmini/DSC02685.jpg
http://i57.photobucket.com/albums/g222/DBBmini/DSC02684.jpg
http://i57.photobucket.com/albums/g222/DBBmini/DSC02687.jpg
http://i57.photobucket.com/albums/g222/DBBmini/DSC02690.jpg
http://i57.photobucket.com/albums/g222/DBBmini/DSC02692.jpg
http://i57.photobucket.com/albums/g222/DBBmini/DSC02693.jpg

[88_pacifica]

I want a CNC machine!!!

You lucky bastage... :thumb:

[DBB mini]

I want a CNC machine!!!

You lucky bastage... :thumb:

Lol I just have access to the cnc, key to the shop. It made it pretty easy. It's only a 4 axis, had to compund angle it to get the runners right.

[turbovanman²]

Looking good, :thumb:

[DBB mini]

Looking good, :thumb:

Thanks Simon.:D

[black86glhs]

Lol I just have access to the cnc, key to the shop. It made it pretty easy. It's only a 4 axis, had to compund angle it to get the runners right.4 axis is better than no axis, fo sho!!

[DBB mini]

Some pics Brandon posted up on my project thread. I took pics from my phone, sent em to him, forgot my camera at the shop. Thanks bra

http://img.photobucket.com/albums/v515/mobite/imagejpeg_0_0.jpg
http://img.photobucket.com/albums/v515/mobite/imagejpeg_0_1.jpg
http://img.photobucket.com/albums/v515/mobite/imagejpeg_0_2.jpg
http://img.photobucket.com/albums/v515/mobite/imagejpeg_0_3.jpg
http://img.photobucket.com/albums/v515/mobite/imagejpeg_0_4.jpg
http://img.photobucket.com/albums/v515/mobite/imagejpeg_0_5.jpg