what should it run?

[86seeS]

just a rough guess what should my car run in the 1/4...its on 25lbs

1987 glhs shelby charger
- 2.2 turbo tII intercooled
- turbonetics super60 48a/r cold 63a/r hot ceramic coated
- turbonetics large can waste gate
- turbonetics 2.5 swing valve
- g style boost controler
- koni full adj. all around (they came stock)
- 1g dsm bov (crushed)
- mopar oil pump
- n/a roller cam
- fwd stage 5 ecu
- fwd hybrid clutch
- mopar head gasket
- 555 cable shift trans
- modded short shift
- solid mounts
- arp head studs & manifold bolts
- msd ignition coil
- wix oil and fuel filter
- wagner brakes
- gates belts and hoses
- auto meter 30/30 boost guage
- fwd performance piller pod
- gm 3 bar map sensor
- AEM wideband
- mopar super60 injectors
- AEM dry flow cold air
- bfg g-force drag radials

[turbovanman²]

Where did you get the cam? Mopar never made a roller S60 cam?

I say if you can hook up/drive, 12.5@110 mph, :clap:

[86seeS]

sorry its a n/a roller

[Vigo]

Im with Simon... itll all be about traction, but it should trap 105-110mph i think.

[turbovanman²]

Im with Simon... itll all be about traction, but it should trap 105-110mph i think.

If mine traps at 104 at 12.5, his should be higher, ;)

[Vigo]

but you have slicks and some weight holding your front end down.. he has drag radials and 1000 less lbs.. traction will be a problem :p

[cordes]

13.3 at 108 MPH.

[turbocars]

12.90 at 106 mph

[WLKivett]

13.7 at 106.78