PDA

View Full Version : I give up - smec harness swap?



Phreakish
05-19-2006, 11:51 PM
I got me-self an '89 2.2 TII smec and harness finally, and have the bulkhead connector to swap it into my charger... The only problem is I CANT FIND THE PINOUTS.

I've pm'd, I've searched, I've found nothing useful to ME.

every other post I read says 'search, it was covered last week' and I do so.... never find anything I can USE.

So, does ANYONE have the bulkhead pinouts for an '85 L body T1, and for an '89 smec Turbo??? If so, POST IT PLEASE. I've had the harness a month and havn't gotten to make ANY progress here...

tryingbe
05-21-2006, 12:15 PM
http://minimopar.knizefamily.net/ecu/index.html

You mean those?

Clay
05-21-2006, 01:08 PM
that gets him part way, but he still needs the bulkhead (drivers side) pin outs for an 85 L-body.

clay

The S is Silent
05-21-2006, 01:12 PM
If I get time, I'll run out and make copies of Clay's notes that he sent with the harness I bought from him. The notes I have are for putting a minivan SMEC into an L-body.

Omnious
05-21-2006, 01:12 PM
Look here

http://boostedmopar.com/forums/showthread.php?t=4867&highlight=bulkhead

Clay
05-21-2006, 01:39 PM
If I get time, I'll run out and make copies of Clay's notes that he sent with the harness I bought from him. The notes I have are for putting a minivan SMEC into an L-body.

I sold you a harness???

The S is Silent
05-21-2006, 02:13 PM
Sorry...I saw your name and typed it on accicent.

I got the harness from Heath. I'll send you Heath's notes when I get a chance. PM me your address and your e-mail address so I can get it to you either in electronic form or on paper.

Clay, I appologize for making you think you were going senile ;)

iTurbo
05-21-2006, 03:34 PM
The public library has always had all the info I needed. Look for the "Mitchell" service manuals in the reference section.

Clay
05-21-2006, 05:09 PM
Clay, I appologize for making you think you were going senile ;)

hehehe No problemo!! :thumb:

Phreakish
06-08-2006, 05:27 PM
still in need - been really f'n busy at work for 3 weeks, but I have about an hour each night before bed to do this...

I can get *some* of what I need,but the pinout for the '89 (or 88?) daytona turbo Z TII smec I've got... not sure if its much different from any others... so...

Phreakish
06-08-2006, 05:33 PM
Okay, I found a bulkhead pinout for an '88 G body, I assume the bulkhead connector for a smec car is the same for turbo/non-turbo, but that the HARNESS is different? If the bulkhead connectors are the same, then I should be set...

Phreakish
06-08-2006, 06:04 PM
how's this for starters?

50 way 40 way
1 connects to
2 connects to
3 connects to
4 connects to
5 connects to 39
6 connects to 5
7 connects to
8 connects to 4
9 connects to
10 connects to 35
11 connects to
12 connects to
13 connects to
14 connects to
15 connects to ?
16 connects to ?
17 connects to 17
18 connects to 18
19 connects to 27
20 connects to 9
21 connects to 13
22 connects to 34
23 connects to 25
24 connects to 32
25 connects to
26 connects to 24
27 connects to
28 connects to 8
29 connects to 33
30 connects to
31 connects to
32 connects to 21
33 connects to 31
34 connects to
35 connects to
36 connects to
37 connects to
38 connects to 10
39 connects to
40 connects to
41 connects to
42 connects to
43 connects to
44 connects to
45 connects to
46 connects to
47 connects to 38
48 connects to 35
49 connects to 40
50 connects to 14

Anyone else got some insight maybe? mostly need help with:

50 way pin 1 "battery feed" - where is this on the 40 way?
50 way pins 45 and 46 for the wiper motor - where do they (or how) connect to the 40 way?
50 way pin 41 "stop lamps" - do I need this on the 40 way?
50 way pin 36 - where on the 40 way does this go?
50 way pins 7 and 8 - same, where do they go?

The others I think I've got...

The S is Silent
06-08-2006, 06:35 PM
Spot checking with the notes that came with Heath's wiring...mind you this is minivan and charger wiring.

Just looking...you have 35 listed twice for the 40 way. On my stuff, that is heated rear window, so pin 48 from the 50 should go there (assuming things are the same).

"8 to 4" : My pinouts show that connecting speed control to ignition switch. Double check this one. My notes show 8 to 11...which looks completely wrong too. :shrug:

"10 to 35" : Ours are completely different, methinks. Anyways, I'll see if I can answer the last questions. Disregard the last two things.

My 50way pin 1 is "Headlamp Switch, 12RD", and that doesn't go anywhere on mine. It's a dangler.

Heath has pins 45 and 46 going to 15 and 16 on the 40way respectively.

Pin 41 is not listed on mine.

That's all I've got. I hope it helps at least a little. But it probably won't.

Phreakish
06-08-2006, 06:54 PM
hmm... methinks we have some differences. Was you work with an '85 L body?

The 10 to 35 should be 10 to 36 (fog lamps)

50way pin 1 for me lists "battery feed" (rd wire)

What year smec were you working with? 88 or 89? could possibly be small changes in the bulkhead connector, or differences in turbo/non-turbo...