Performance Parts for Sale

[TurboBoy4]

Getting out of Turbo Dodge's need to move on to different projects and get rid of these parts asap.

Pictures coming soon.....

All parts are plus shipping!

1 piece intake manifold ported/polished ports and tb opening will come with 52mm throttle body was setup for a cold start injector will include this also. $100 shipped

powder coated valve cover (red) never installed, great condition $50 shipped

52mm throttle body with sensors $20 shipped

Holset turbo, not for sure on specs for this, never installed. make an offer please..... $150 shipped

782 head partially ported in good condition. small cracks between vlaves like a lot of these heads $100 shipped

Have a brand new a-pillar molding for a t-top car never installed and still in package cost $130 from dealership. $65 shipped

Have an 89 c/s daytona t/top car. New fuel pump and fuel tank. Started and ran fine. Clutch is bad in car and transmission bell housing is cracked. Has been sitting though. However interior is in exceptional condtion. Will sell for $650 obo

All of this stuff is in great condition, just need to move on. I will try to get more pics up as soon as possible

Here is a link to photos
http://s1001.photobucket.com/albums/af132/turboboy4/?albumview=grid

[1984rampage]

Interested in the intercooler and piping. What car was it setup for? And I'll need pics!

Thanks

[TurboBoy4]

I believe it was setup for a charger with a t2 setup

[1984rampage]

I'd like some pics whenever you can get some.. Im also interested in the lonewolf intake!

[TurboBoy4]

Ok i put a link to the pictures. A few of the parts arent pictured and the car isnt pictured

[TurboBoy4]

I'd like some pics whenever you can get some.. Im also interested in the lonewolf intake!

The items you are interested in are pictured except the piping

[Captain Chaos]

Where are you located?

[TurboBoy4]

Located in Laramie, Wy 82072

[junior92]

Im also interested in the lonewolf intake can i get some pics too. thankz

[TurboBoy4]

Link to the pics at the top in original post

[85daytona]

Hmm dibs on the lonewolf intake price shipped to 77503 money will be on the way to you once I know how much

Thanks, chris

[85daytona]

Also where does the charge air sensor go on it on top or do i have to tap a hole in it?

[trannybuster]

Have ported exhaust manifold that is setup for t3 turbo flange. $75 obo?

^^ Who ported it. Also I take it those are 2.5 pistons? THX

[wallace]

Could you provide the data tag info on the holset? Also pics would be great too if possible.

[TurboBoy4]

Have ported exhaust manifold that is setup for t3 turbo flange. $75 obo?

^^ Who ported it. Also I take it those are 2.5 pistons? THX

When i bought the pistons i was told they are 2.2 pistons .40 over, as far as the exhaust manifold it was personally ported and i will hopefully have the pics of that up later tonight

[TurboBoy4]

Could you provide the data tag info on the holset? Also pics would be great too if possible.

link to pictures at the top

[TurboBoy4]

Lonewolf intake sold to 85 Daytona. Bump on the rest of this stuff come on guys need these parts gone

[1984rampage]

How much for just the pipe and tial BOV?

[TurboBoy4]

Sorry no tial bov available, and after further inspection of the ported exhaust manifold, who ever ported the manifold got too close to a couple exhaust stud holes and there are two small holes. Should be able to be fixed with no problem though price lowered

[TurboBoy4]

Ok everyone here are the rest of the pictures including head, ported exhaust manifold, and 89 C/S Daytona
http://s1001.photobucket.com/albums/af132/turboboy4/?albumview=grid

[TurboBoy4]

bump!!

[TopDollar69]

So the Shelby Daytona is complete with engine?

[TurboBoy4]

Yea complete, running vehicle, By this thing and add it to your collection:thumb:

[TurboBoy4]

Bump!!! All prices include shipping now. Got to get rid of this stuff

[TurboBoy4]

:bump:

[TurboBoy4]

Turbo sold pending payment. Start making me offers on the rest of this stuff please reasonable offers will be accepted......Thank you

[85daytona]

Bump for a great seller. LWP manifold arrived very fast and in perfect condition as described.

Thanks a lot, Chris :thumb:

[TurboBoy4]

Thanks for the good words

[TurboBoy4]

Ok guys for those interested in the turbo the deal fell through so let me know if you are still interested in it

[TurboBoy4]

Getting out of Turbo Dodge's need to move on to different projects and get rid of these parts asap.

Pictures coming soon.....

All parts are plus shipping!

2.2 common block .40 over je pistons, almost brand new. around 250 miles on pistons, in great shape $325 shipped

2.2 common block rods from fwd performance. shot peened, oiling holes bored, and big wrist pins installed.....never used $200 shipped

1 piece intake manifold ported/polished ports and tb opening will come with 52mm throttle body was setup for a cold start injector will include this also. $140 shipped

powder coated valve cover (red) never installed, great condition $55 shipped

Silver fidanza adjustable cam gear (round tooth) never used $105 shipped

52mm throttle body with sensors $25 shipped

Holset turbo, not for sure on specs for this, never installed. make an offer please..... $150 shipped

782 head partially ported in good condition. small cracks between vlaves like a lot of these heads $150 shipped

Have a brand new a-pillar molding for a t-top car never installed and still in package cost $130 from dealership. $85 shipped

Have an 89 c/s daytona t/top car. New fuel pump and fuel tank. Started and ran fine. Clutch is bad in car and transmission bell housing is cracked. Has been sitting though. However interior is in exceptional condtion. Will sell for $650 obo if someone wants all of this stuff I will let everything go for $2000

All of this stuff is in great condition, just need to move on. I will try to get more pics up as soon as possible

Here is a link to photos
http://s1001.photobucket.com/albums/af132/turboboy4/?albumview=grid

Prices have been lowered and updated please help me get this stuff out of here. All prices are shipped!!!!!! Thanks....

[TurboBoy4]

Bump!!!!!!!! No one is interested in this stuff. Make me some offers

[TurboBoy4]

Intercooler and piping sold

[TurboBoy4]

Injectors and muffler sold

[TurboBoy4]

Getting out of Turbo Dodge's need to move on to different projects and get rid of these parts asap.

Pictures coming soon.....

All parts are plus shipping!

2.2 common block .40 over je pistons, almost brand new. around 250 miles on pistons, in great shape $325 shipped

2.2 common block rods from fwd performance. shot peened, oiling holes bored, and big wrist pins installed.....never used $200 shipped

1 piece intake manifold ported/polished ports and tb opening will come with 52mm throttle body was setup for a cold start injector will include this also. $140 shipped

powder coated valve cover (red) never installed, great condition $55 shipped

Silver fidanza adjustable cam gear (round tooth) never used $105 shipped

52mm throttle body with sensors $25 shipped

Holset turbo, not for sure on specs for this, never installed. make an offer please..... $150 shipped

782 head partially ported in good condition. small cracks between vlaves like a lot of these heads $150 shipped

Have a brand new a-pillar molding for a t-top car never installed and still in package cost $130 from dealership. $85 shipped

Have an 89 c/s daytona t/top car. New fuel pump and fuel tank. Started and ran fine. Clutch is bad in car and transmission bell housing is cracked. Has been sitting though. However interior is in exceptional condtion. Will sell for $650 obo if someone wants all of this stuff I will let everything go for $2000

All of this stuff is in great condition, just need to move on. I will try to get more pics up as soon as possible

Here is a link to photos
http://s1001.photobucket.com/albums/af132/turboboy4/?albumview=grid

Updated parts list

[TurboBoy4]

Getting out of Turbo Dodge's need to move on to different projects and get rid of these parts asap.

Pictures coming soon.....

All parts are plus shipping!

2.2 common block .40 over je pistons, almost brand new. around 250 miles on pistons, in great shape $300 shipped

2.2 common block rods from fwd performance. shot peened, oiling holes bored, and big wrist pins installed.....never used $200 shipped

1 piece intake manifold ported/polished ports and tb opening will come with 52mm throttle body was setup for a cold start injector will include this also. $115 shipped

powder coated valve cover (red) never installed, great condition $50 shipped

Silver fidanza adjustable cam gear (round tooth) never used $95 shipped

52mm throttle body with sensors $25 shipped

Holset turbo, not for sure on specs for this, never installed. make an offer please..... $150 shipped

782 head partially ported in good condition. small cracks between vlaves like a lot of these heads $100 shipped

Have a brand new a-pillar molding for a t-top car never installed and still in package cost $130 from dealership. $65 shipped

Have an 89 c/s daytona t/top car. New fuel pump and fuel tank. Started and ran fine. Clutch is bad in car and transmission bell housing is cracked. Has been sitting though. However interior is in exceptional condtion. Will sell for $650 obo

All of this stuff is in great condition, just need to move on. I will try to get more pics up as soon as possible

Here is a link to photos
http://s1001.photobucket.com/albums/af132/turboboy4/?albumview=grid

Updated prices all include shipping and all are best offer so shoot me some prices

[zin]

PM Sent on the Cam Gear.

Mike

[30 PSI SHADOW]

Laramie, LOL! i went to wyo tech back in 92. Is the "drawbridge bar" still there??

[TurboBoy4]

Laramie, LOL! i went to wyo tech back in 92. Is the "drawbridge bar" still there??

Lol I went to wyotech also but graduated in 2007. I havent heard of that bar so I think it might have shut down possibly

[TurboBoy4]

Bump Bump!!!

[TurboBoy4]

Update, cam gear is sold. Make me some offers on the rest of this stuff

[TurboBoy4]

Bump someone buy this stuff and take it off my hands please. Accepting almost any offers!!!!!!!!!!! thanks

[TurboBoy4]

Pistons and rods are sold pending payment

[TurboBoy4]

Pistons and rods are sold. Still accepting offers any reasonable offer will most likely be excepted

[1984rampage]

Garrett turbo on the daytona? Willing to sell it?

[janus]

2.2 common block rods from fwd performance. shot peened, oiling holes bored, and big wrist pins installed.....never used $200 shipped


question about those rods, do they have arp rod bolts installed and resized for? also, are those big wrist pins for venolia pistons only?

[TurboBoy4]

Garrett turbo on the daytona? Willing to sell it?

Not at this point might have people interested in buying it complete

[TurboBoy4]

Getting out of Turbo Dodge's need to move on to different projects and get rid of these parts asap.

Pictures coming soon.....

All parts are plus shipping!

1 piece intake manifold ported/polished ports and tb opening will come with 52mm throttle body was setup for a cold start injector will include this also. $85 shipped

52mm throttle body with sensors $15 shipped

Holset turbo, not for sure on specs for this, never installed. Absolutely no shaft play make an offer please..... $125 shipped

782 head partially ported in good condition. small cracks between valves like a lot of these heads $75 shipped

Have a brand new a-pillar molding for a t-top car never installed and still in package cost $130 from dealership. $50 shipped

Have an 89 c/s daytona t/top car. New fuel pump and fuel tank. Started and ran fine. Clutch is bad in car and transmission bell housing is cracked. Has been sitting though. However interior is in exceptional condtion. Will sell for $550 obo

All of this stuff is in great condition, just need to move on. I will try to get more pics up as soon as possible

Here is a link to photos
http://s1001.photobucket.com/albums/...albumview=grid

[TurboBoy4]

Holset turbo still up for grabs

[TurboBoy4]

Bump Bump take this stuff off my hands

[janus]

question about those rods, do they have arp rod bolts installed and resized for? also, are those big wrist pins for venolia pistons only?

bump and what exact holset turbo is that? hx/hy? 35/40/45?

[TurboBoy4]

The exhaust side is an H1C hosing and the compressor side is a 16cm

[TurboBoy4]

BUMP valve cover is sold

[roachjuice]

is this a complete turbo? does it need to be rebuilt?

[TurboBoy4]

No the turbo is brand new never installed

[TurboBoy4]

Getting out of Turbo Dodge's need to move on to different projects and get rid of these parts asap.

Pictures coming soon.....

All parts are plus shipping!

1 piece intake manifold ported/polished ports and tb opening will come with 52mm throttle body was setup for a cold start injector will include this also. $85 shipped

52mm throttle body with sensors $15 shipped

Holset turbo, not for sure on specs for this, never installed. Absolutely no shaft play make an offer please..... $125 shipped

782 head partially ported in good condition. small cracks between valves like a lot of these heads $75 shipped

Have a brand new a-pillar molding for a t-top car never installed and still in package cost $130 from dealership. $50 shipped

Have an 89 c/s daytona t/top car. New fuel pump and fuel tank. Started and ran fine. Clutch is bad in car and transmission bell housing is cracked. Has been sitting though. However interior is in exceptional condtion. Will sell for $550 obo

All of this stuff is in great condition, just need to move on. I will try to get more pics up as soon as possible

Here is a link to photos
http://s1001.photobucket.com/albums/...albumview=grid

[TurboBoy4]

Price and parts update. If you dont think these prices are fair just let me know and make an offer really need to get this stuff out of my hair. Thanks

[roachjuice]

man id love to have that turbo. but holidays are around so a bad time for me.

[TurboBoy4]

man id love to have that turbo. but holidays are around so a bad time for me.

Youve got a PM my friend:thumb:

[TurboBoy4]

Daytona is sold, please make me some offers on the rest of this stuff need it gone asap

[TurboBoy4]

How bought buy either the head or the intake at the posted price and get the other for $20 just to cover shipping just trying to get rid of these things

[TurboBoy4]

Bump Bump!!

[zin]

Got the pistons and rods, nicely packed and shipped quick!

Oh, FREE BUMP!!

Mike

[TurboBoy4]

Got the pistons and rods, nicely packed and shipped quick!

Oh, FREE BUMP!!

Mike

Hey I appreciate it and thanks for the purchase super easy and quick:thumb:

NO ONE wants this stuff, feel free to make any offer low ball me do whatever just need to get rid of this stuff

[TurboBoy4]

Turbo is sold!!!!!!

[TurboBoy4]

Ok guys lowering the prices again, have to get rid of this stuff.
Intake manifold with 52mm TB included $80 shipped obo
782 Cylinder head $70 shipped obo
Take them both for 125 shipped
Have a couple nice 52mm throttle bodies $15 shipped

If they are too high, make me some offers

[TurboBoy4]

All parts are sold finally!!!!!!!!!!!!!!!!1