Tony Hanna
05-14-2006, 06:29 PM
John and I are working up a project to side mount a T-Bird SC intercooler in the Sundance. Aside from being a good bit bigger, and having funky pipe connections, it's layed out almost exactly like a stock Mopar cooler.
The problem I'm trying to work out now is choosing a radiator that will fit.
Since this will closely resemble a factory TII setup when it's done, I figured a TII rad would be the place to start.
If anybody has a TII rad laying around would you mind posting up the measurements? I just need the width of the radiator itself, not the rad and cooler together. I can add that to the width of the SC cooler and check it against the space I have to work with in the car. If a TII rad will work, I'll try to find one or more likely just order an aftermarket aluminum unit with the same measurements.
Thanks in Advance,
The problem I'm trying to work out now is choosing a radiator that will fit.
Since this will closely resemble a factory TII setup when it's done, I figured a TII rad would be the place to start.
If anybody has a TII rad laying around would you mind posting up the measurements? I just need the width of the radiator itself, not the rad and cooler together. I can add that to the width of the SC cooler and check it against the space I have to work with in the car. If a TII rad will work, I'll try to find one or more likely just order an aftermarket aluminum unit with the same measurements.
Thanks in Advance,