code 27

[86shelby15psi]

what is it and how 2 fix it:p ok another thing is that when i put my stock computer in it fires right up with no problem it just wont idel because of ais difference but when i hook my glhs stage 2 computer i get code 27 and wont start

[BadAssPerformance]

Sounds like an injector issue... check this out (http://minimopar.knizefamily.net/fault/index.html#21-27)

[altered7151]

This link should go in your favorites, it has all the codes and descriptions on it, very handy: http://minimopar.knizefamily.net/fault/index.html
Looks like code 27 is bad wiring somewhere, make sure you are getting good connections on the plug.

[86shelby15psi]

ok why didnt i get code 27 with the stock computer in there?

[GLHSKEN]

Stage 2 is fried... Or your PM is going bad...

Does the stocker throw the code??

[GLHSKEN]

Lol...

[86shelby15psi]

nope no codes on stock comp

[GLHSKEN]

Then it's ths LM...

[86shelby15psi]

now i have to wait intell the 2nd of jan because mike at forwardmotion wont be in intell then :P

[Frank]

Sometimes my daytona had this problem with the computer.... it was a bad connection to the SMEC or the LM in your case. Look for a loose pin, recessed pin, or anything abnormal with the injector wires on the connectors.


Frank

[altered7151]

now i have to wait intell the 2nd of jan because mike at forwardmotion wont be in intell then :P

Theres other venders that have those LM, try www.turbosunleashed.com. That is unless you bought it from FM and need to return it.