PDA

View Full Version : General: 91' Shadow Vert performance parts/part-out


Bubba
09-28-2009, 12:10 PM
All parts are still installed on car. Will be removing these over the next few weeks. So, if this is something you need right away and can't wait, I'd suggest looking elsewhere. Anyone else, please bear with me. This is a tad bit emotional for me to totally rip this car apart after the hundreds of hours spent on it. Those who know me and the car know how much I babied it and never raced it. Parts are all new/like new.

Spearco FMIC with welded 90 degree bends: $500 plus shipping obo. Same one FWD perf. sells. Will include brackets.

Upper intercooler piping, wrinkle black finish with TurboXS bov $125 + shipping

Used 2.2 CB Forged Crankshaft $125 + shipping

T3/T4 Hybrid 50 Trim Stage2/.63 Exhaust Turbo <5k miles $500 + shipping
Could do partial trade for working stock Garrett/Super 60 turbo.

TU Cast header <2k miles $375 + shipping

TU 3" Swingvalve <2k miles $250 + shipping

Innovate WBO2/Data logging set-up with LC-1, XD-16 and SSI-4 $350 +shipping


Will accept some trades for stock parts needed to put the car back to stock. Will accept cash, money order or paypal +3%.

If you don't like the price, make me an offer...who knows, I may just take it.
1984rampage
09-28-2009, 12:32 PM
Why?!?!
Captain Chaos
09-28-2009, 01:04 PM
Because nobody will buy it whole.
http://www.turbo-mopar.com/forums/showthread.php?t=39935
Bubba
09-28-2009, 03:11 PM
Because nobody will buy it whole.
http://www.turbo-mopar.com/forums/showthread.php?t=39935

Bingo....

I plan to put the car back to stock, maybe keep it a while longer then sell it.
Bubba
09-29-2009, 10:00 AM
The dis-assembly has begun. Pulled all the Innovate stuff out this morning. Started disconnecting all the autometer gauges. I'll probably jack the front end up this weekend and start re-moving the head/turbo.
Bubba
09-29-2009, 09:07 PM
:bump: for post edit.
135sohc
09-29-2009, 10:05 PM
Need a 2.5 crankshaft ?
Bubba
09-29-2009, 10:10 PM
Need a 2.5 crankshaft ?

I may or may not...I haven't decided whether I'm going to just keep the bottom end or re-build another one. Does it need to be turned, or is it ready to drop in?
135sohc
09-29-2009, 10:20 PM
It has a very light scratch on the #1 rod journal, havnt measured it with a micromemter to see what the specs are but I think a polish would take care of it. .10 under at the max
Dave
09-30-2009, 02:25 AM
Christian, how much for the Pyrometer and water temp?
Bubba
09-30-2009, 07:27 AM
Christian, how much for the Pyrometer and water temp?

$135 for the pair. The pyro got a new sending unit last year. the water temp is an electrical unit, not mechanical.
Bubba
09-30-2009, 07:28 AM
It has a very light scratch on the #1 rod journal, havnt measured it with a micromemter to see what the specs are but I think a polish would take care of it. .10 under at the max

I'll keep you in mind if I end up going that route. Right now, I'm considering keeping my FM bottom end, unless someone's willing to pay a decent amount for it.
Bubba
09-30-2009, 08:14 AM
Turbo, TU Header and 3" swingvalve SOLD pending funds
Bubba
09-30-2009, 08:29 AM
Turbo, TU Header and 3" swingvalve SOLD pending funds
contraption22
09-30-2009, 08:30 AM
You have a PM about the forged 2.2 crank.
Bubba
10-02-2009, 10:19 PM
Crank sold. Innovate stuff still available. I have one interested party in the SSI4; I'd be willing to separate if someone else wants the WBO2 and gauge set-up.
Bubba
10-05-2009, 01:17 PM
:bump:
mario03SRT
10-06-2009, 08:42 AM
How much for the SSI4?

I have the rest of the WB goodies.

Marion
Bubba
10-06-2009, 01:00 PM
How much for the SSI4?

I have the rest of the WB goodies.

Marion

I have someone ahead of you that wants the SSI4. I really don't want to break the Innovate items up.
Twisted Noodle
10-06-2009, 02:35 PM
Well if some one buys the SSI4, whats the price on the LC-1 and XD-16? I'm looking for a WB
Bubba
10-06-2009, 02:37 PM
$250 for the guage/LC-1, $100 for the SSI4 + shipping /3% for paypal
turbovanmanČ
10-06-2009, 02:41 PM
$250 for the guage/LC-1, $100 for the SSI4 + shipping /3% for paypal

Good price, :thumb:
88wdywoodpecker
10-06-2009, 02:45 PM
NO!! such a great car as it was... Cleanest vert I've seen yet!
Bubba
10-06-2009, 02:51 PM
Good price, :thumb:

Yea, I'm surprised it hasn't sold yet.
Bubba
10-06-2009, 02:53 PM
NO!! such a great car as it was... Cleanest vert I've seen yet!


Thanks! No worries though...I'll be putting it back together, but mostly with stock parts. Engine bay will look very similar; I'm keeping my fuel rail set-up and valve cover/Intake manifold, but going with a stock intercooler instead of the front mount Spearco.
turbovanmanČ
10-08-2009, 02:49 PM
Yea, I'm surprised it hasn't sold yet.

If I hadn't just bought one, I would have grabbed it, :D
Bubba
10-08-2009, 03:23 PM
Innovate LC1 and XD16 gauge SOLD
Bubba
10-08-2009, 04:50 PM
Innovate SSI4 SOLD
Bubba
10-12-2009, 08:09 AM
Still have the Intercooler and piping available. More stuff to come soon!
Twisted Noodle
10-12-2009, 03:47 PM
I got the Innovate package today. Everything looks great. I can't believe it got here already! Thanks Bubba
Bubba
10-12-2009, 03:53 PM
Awesome! Hope you like it!