rear spindle and hub needed (disc brake car)

[welby]

I need a rear spindle and hub for my 90 lebaron VNT (11" brakes, though I'm not sure that matters).

Let me know what you've got. Thanks.

[135sohc]

The spindle is the same part on every car, drum or disc.

[welby]

Thanks for the heads-up, man. Are the hubs the same on all of the disc brake cars?

[dodgeshadowchik]

No the hubs are different.

[135sohc]

No the hubs are different.

What exactly is different about them ? I've never had a disc hub in my hand but having a hub from a drum here and looking in the parts catalog. It looks very similar ?

[dodgeshadowchik]

From what I remeber when I put the drum hubs on, the rotor didn't fit on all the way (you could still see parking brake shoes) and calipers wouldn't go on and bolt up with out forcing them.

[135sohc]

so its a longer hub then. Good to know, cause I was gonna try ands reuse mine as one less thing to have to locate when I put discs on the rear of mine.

[steve-o]

I have hubs from an 87 Shelby Lancer, will they work?

Steve-o

[welby]

I have hubs from an 87 Shelby Lancer, will they work?

Steve-o

Ummm, I'd like to know this too.

[135sohc]

All 89+ disc brakes and parts are different from the 87-88 stuff.

You need p/n 4383492 w/o ABS or 4383988 w/ABS

Shelby Lancer is 4467861

[spoolinhard]

I have the vented rear disc setup from an 89 TII gtc lebaron. It had 11" brakes on it. I have the spindles, calpers and discs, I think the discs are bad. $50 takes it all. Pm me if interested.