PDA

View Full Version : Turbo discharge flange-anyone produce?



john1320
09-23-2009, 02:40 AM
I need a standard T2 garrett disharge flange (not SV housing) with or w/o the wastegate puck. Does anyone produce this? I swear iv'e seen people weld their 90* 3" exaust piping to these b4. I cannot afford the ATP unit.

86Shelby
09-23-2009, 10:42 AM
They are available for the standard Garrett 5-bolt pattern, I have one on my R/T with a pipe welded to it like you describe. I have not seen them for the Mopar bolt pattern.

1BADVAN
09-23-2009, 01:15 PM
there was a guy who used to sell them on ebay under daytona turbo flange IDK if he still does

1BADVAN
09-23-2009, 01:17 PM
check this out i think it is what you mean http://cgi.ebay.com/ebaymotors/Chrysler-Dodge-T3-Turbo-flange-Lebaron-Daytona-Shelby_W0QQcmdZViewItemQQ_trksidZp3286Q2em20Q2el11 16QQhashZitem518434dd7cQQitemZ350110408060QQptZLHQ 5fDefaultDomainQ5f100

turbovanmanČ
09-23-2009, 01:19 PM
Yep, I was going to say that, Ebay, :eyebrows:

I think Cindy might have some too.

john1320
09-29-2009, 07:33 PM
Thanks guys, the link was good, and i'll have to call Cindy too. :)

john1320
10-02-2009, 01:24 AM
Update: Talked to ATP, problem solved.

I will post up pics when i have thier standard T2 Chrysler V=band wastegate housing installed.
I'm not sure of price yet, but i can't see it being much more than the $168 they charge for T3 and ford patterns. I was aiming for the flange only before, but after talking to several people found the housing is MUCH less headache.
:amen:

1BADVAN
10-02-2009, 11:04 PM
Cool please post the pics! Do you what size the V band is?

john1320
10-03-2009, 09:25 AM
It's the same size as the other units, 3" :love:
The only item i have to come up with is a long-leg 90* mandrel bent pipe, with the flange lip. I have to check out some local shops to see if i can do better than $90.
I'm hoping to see the part in a little over a week, can't wait!
This setup HAS to be worth more HP over the crappy 2.5" SV housing "wall of doom", lol :amen:

1BADVAN
10-03-2009, 12:39 PM
good Luck! I built a Downpipe for a Vband Swingvalve by getting a 90* mandrel bend pipe (like $20) then bought my own Vband flange off of ebay with a clamp and cut the bend as short as possible to still maintain the 90* and then had the flange welded on it was cheap for me :)