View Full Version : Doing some porting on my Intake,Exhaust and Head Questoin??
87yorker
08-30-2009, 12:46 PM
So im playing around with my Intake and exhaust and head, and I was wondering if anyone had any good hints on what to open up more on them or what? on the intake I dident open it up to much more as there isent much room just I just took out the casting crapy and what not. Is there anything I can do to the turbo or waistgate when I get it off?
GLHNSLHT2
08-30-2009, 12:57 PM
work on the exhaust manifold. there's lots you can take out there. especially where the 3 runners are converged. Just take out the roughness in the turbo, you can open the wastegate a little bit and blend that area.
87yorker
08-30-2009, 01:01 PM
I worked on the exhaust some. were the turbo bolts on I opened up the inside of that alot. smoothed out the runners.
DBB mini
08-30-2009, 09:50 PM
Sorry, but what intake, exhaust or head do you have?
87yorker
08-30-2009, 09:52 PM
TII solid intake. and stock TI head
Darkapollo
09-08-2009, 09:20 AM
why is this in the hybrid conversions section? O_o
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.