Doing some porting on my Intake,Exhaust and Head Questoin??

[87yorker]

So im playing around with my Intake and exhaust and head, and I was wondering if anyone had any good hints on what to open up more on them or what? on the intake I dident open it up to much more as there isent much room just I just took out the casting crapy and what not. Is there anything I can do to the turbo or waistgate when I get it off?

[GLHNSLHT2]

work on the exhaust manifold. there's lots you can take out there. especially where the 3 runners are converged. Just take out the roughness in the turbo, you can open the wastegate a little bit and blend that area.

[87yorker]

I worked on the exhaust some. were the turbo bolts on I opened up the inside of that alot. smoothed out the runners.

[DBB mini]

Sorry, but what intake, exhaust or head do you have?

[87yorker]

TII solid intake. and stock TI head

[Darkapollo]

why is this in the hybrid conversions section? O_o