PDA

View Full Version : Head Milling???



87yorker
08-26-2009, 11:23 PM
So im not 100% sure yet, but IF I have to mill my head, will the Mopar Performance Headgaskets still work? or will I still have to shim them? Im just asking now to see so I know. thanks

GLHNSLHT2
08-27-2009, 12:27 AM
you only want to take off enough to make it flat if it's warped. If that only requires .003 of an inch no worries. If it requires .020 or more of an inch you'd want to think about a copper shim.

87yorker
08-27-2009, 09:35 AM
Ok. Yeah I know how Milling works, I just wasent sure how thick the Mopar gaskets were. So If I buy a MP headgasket for a 87 yorker Turbo that will work fine.

87yorker
08-27-2009, 09:38 AM
Also I order up some Headbolts and washers from Schucks, will they be fine?

GLHNSLHT2
08-27-2009, 10:00 AM
I'd just get a set of MP bolts. They come with Washers. Go to Dave Smith since you're out that way anyway.

87yorker
08-27-2009, 10:46 PM
Well I already have the head bolts and washers from Schucks.