88 Daytona 2.2 TII dyno results

[ssheen]

Had a half day dyno day yesterday with the local TDers. I squeezed out 195 whp / 213 torque running at 10-11psi of boost. Stock turbo, 3" exhaust.

Other modifications
http://www.sheenconsulting.com/car/modifications.html

HP/Torque graph
http://www.sheenconsulting.com/car/pics/May7Dyno.jpg

[The S is Silent]

Had a half day dyno day yesterday with the local TDers. I squeezed out 195 whp / 213 torque running at 10-11psi of boost. Stock turbo, 3" exhaust.

Other modifications
http://www.sheenconsulting.com/car/modifications.html

HP/Torque graph
http://www.sheenconsulting.com/car/pics/May7Dyno.jpg

Looks awesome. That's one nice, flat torque curve :thumb:

[ssheen]

Thanks Matt. I just found out today a flat torque curve is a good thing. :D

[93sundance]

Looks pretty good for that low of boost. Do you think the 3" swingvalve and exhaust did alot for it?

[ssheen]

I do think the 3" exhaust is a huge reason for it. Not too sure what else it could be.

Though I did have the 3" on the car for the dyno run during the summer. That run was a little higher on the whp at 198whp. Bounced off overboost cut out though, so it was boosting 4-5psi more to make an extra 3hp. Timing then was at 8*, this time it was 12*. A new IC on the car this time too.

[glhs875]

That's some good power for such low boost! Crank er up some!!!

[GLHSKEN]

Good #'s... Just shows how restrictive the stock exhaust set-ups can be.